Premium Information is available for this item - Upgrade for $1 a day
4730-00-837-5494
Fluid Passage Bolt
4730008375494 008375494 4556780 ER01702
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE. View more Fluid Passage Bolt
May 2023
20
Marketplace 4730-00-837-5494
Request a Quotation from participating marketplace vendors
Related Documents 4730-00-837-5494 5+ Documents (More...)
1963 4730-00-837-7207 https//www.nsnlookup.com /cage Dana Corp (CAGE Code 88334) 28 Nov 1966 4730-00-837-5494
Restrictions 4730-00-837-5494
4730-00-837-5494 is a Fluid Passage Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 4730-00-837-5494
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-00-837-5494
- US Air Force (FXGC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- France (ZF01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Apr 1991
Approved Sources 4730-00-837-5494
- Part Number
- Manufacturer
- Status
- ER01702
- Manufacturer
- 14798 - Designed Metal Connections Inc (Active)
- Primary Buy
- Primary Buy
- ER01702
- 01989 - Dana Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- ER01702
- 79470 - Dana Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- ER01702
- 88334 - Dana Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 4556780
- 18355 - The Boeing Company (Active)
- Advisory Reference
- Advisory Reference
Datasheet 4730-00-837-5494
- Characteristic
- Specifications
- FIIG
- Specifications
- A121A0
- Distance From First Radial Hole Center To End Of Bolt [BBLB]
- 1.297 Inches Nominal
- Body Style [AAQL]
- Body Wrenching
- Concentric Hole Diameter [AAXC]
- 0.625 Inches Minimum And 0.766 Inches Maximum
- First Diameter From Wrenching Feature [BBKL]
- 0.936 Inches Nominal
- First End Connection Type [ACKM]
- Threaded External Tube
- First End Style Designator [ACKN]
- Plain
- First End Nominal Thread Size [CQYM]
- 0.750 Inches
- First End Thread Class [ACLK]
- 3A
- First End Thread Direction [ACLL]
- Right-Hand
- First End Thread Length [ATKZ]
- 0.500 Inches Nominal
- First End Thread Series Designator [CQMM]
- Unf
- First End Thread Quantity Per Inch [CQKK]
- 16
- First Radial Fluid Hole Diameter [BBKY]
- 0.562 Inches Nominal
- Fourth Diameter From Wrenching Feature [BBKP]
- 0.656 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-225/6,T4 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter [BBKW]
- 1.656 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter [BBKS]
- 1.078 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter [BBKT]
- 1.468 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To Bolt End [BBLD]
- 2.078 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of First Diameter [BBKR]
- 0.422 Inches Nominal
- Second Diameter From Wrenching Feature [BBKM]
- 0.875 Inches Nominal
- Second End Connection Type [ACLS]
- Threaded External Tube
- Second End Nominal Thread Size [CRNB]
- 1.062 Inches
- Second End Seat Angle [CRCN]
- 12.0 Degrees Nominal
- Second End Style Designator [ACLT]
- Flareless
- Second End Thread Class [ACMR]
- 3A
- Second End Thread Direction [ACMS]
- Right-Hand
- Second End Thread Quantity Per Inch [CRMX]
- 12
- Second End Thread Series Designator [CRPF]
- Un
- Overall Length [ABHP]
- 2.031 Inches Nominal
- Width Across Flats [ASDB]
- 1.375 Inches Nominal
- Wrenching Feature Height [BBLF]
- 0.297 Inches Nominal
- Wrenching Feature Style [BBDF]
- Hexagon
- Surface Treatment [SFTT]
- Anodize
- Third Diameter From Wrenching Feature [BBKN]
- 0.938 Inches Nominal
Weapon Systems (WSDC) 4730-00-837-5494
DLA Procurement Analysis 4730-00-837-5494
Management Data 4730-00-837-5494
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 4730-00-837-5494
Freight Information 4730-00-837-5494
4730-00-837-5494 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093480. A Sub NMFC of X. It has a NMFC Description of BOLTS/NUTS METAL SILVER PLATED. 4730-00-837-5494 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 4730-00-837-5494 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 4730-00-837-5494 is not classified as a special type of cargo when transported by water. 4730-00-837-5494 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-00-837-5494
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 4730-00-837-5494 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: