5130-00-134-7590

5310-12-158-6374 5310121586374 121586374 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-33-102-0746 5310331020746 331020746 is a nut having 6 flat sides, flat on the bottom and having a slotted cylindrical or dome shaped upper portion. it is designed to provide positive locking when used with a solid or split (cotter) pin. excludes nut (1), plain, slotted, hexagon.

4820-12-346-9765 4820123469765 123469765 is a valve designed to automatically release excessive pressures. it is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. it is not designed for regulation of continuously fluctuating loads. it may be inline or cartridge (manifold) design. excludes valve (1), relief, pressure and temperature.

7010-27-024-7884 7010270247884 270247884 is a complete digital computer system, as defined by computer, digital, which includes the computer and all the associated peripheral hardware. may be a networked system or stand alone. also, may or may not have satellite and/or global capabilities via built-in or add-on devices.

M35 Truck TM-9-2520-246-34 3052 Transmission Manual Page 125 of 153.