Premium Information is available for this item - Upgrade for $1 a day
5305-00-516-5996
Close Tolerance Screw
5305005165996 005165996 HT8167-8-13
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
May 2023
3
Marketplace 5305-00-516-5996
Request a Quotation from participating marketplace vendors
Related Documents 5305-00-516-5996 1+ Documents (More...)
Close Tolerance Screw 5305005165996 005165996 5305-00-516-5996 5305005165996 005165996 is a screw
Restrictions 5305-00-516-5996
5305-00-516-5996 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5305-00-516-5996
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5305-00-516-5996
- Part Number
- Manufacturer
- Status
- HT8167-8-13
- Manufacturer
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-00-516-5996
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Hardness Rating [CQFM]
- 46.0 Rockwell C Minimum And 50.0 Rockwell C Maximum Overall
- Minimum Tensile Strength [CQBC]
- 132000 Pounds Per Square Inch
- Part Name Assigned By Controlling Agency [CXCY]
- Navy Special Project
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Treatment Document And Classification [STDC]
- Nas672 Assn Std Single Treatment Response Overall
DLA Procurement Analysis 5305-00-516-5996
Management Data 5305-00-516-5996
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-00-516-5996
Freight Information 5305-00-516-5996
5305-00-516-5996 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-00-516-5996 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-00-516-5996 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-00-516-5996 is not classified as a special type of cargo when transported by water. 5305-00-516-5996 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-00-516-5996 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: