Premium Information is available for this item - Upgrade for $1 a day
5307-00-090-1593
Stepped Stud
5307000901593 000901593 40538P006 40538P6
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends on which the nominal diameter of one threaded section is greater than the other. The entire unthreaded portion must be of a single diameter equal to or smaller than the maximum major diameter of the larger threaded end. Includes radial grooves or thread reliefs. Excludes items with tapered threads. View more Stepped Stud
May 2023
17
Marketplace 5307-00-090-1593
Request a Quotation from participating marketplace vendors
Related Documents 5307-00-090-1593 3+ Documents (More...)
Stepped Stud 5307000901593 000901593 5307-00-090-1593 5307000901593 000901593 is a headless fastener
Restrictions 5307-00-090-1593
5307-00-090-1593 is a Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-090-1593
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Spain (YB)
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA)
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE)
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- United States of America (ZZ)
Approved Sources 5307-00-090-1593
- Part Number
- Manufacturer
- Status
- 40538P006
- Manufacturer
- 73342 - Allison Transmission Inc (Active)
- Primary Buy
- Primary Buy
- 40538P006
- 7X677 - General Motors Llc (Active)
- Secondary Buy
- Secondary Buy
- 40538P6
- 73342 - Allison Transmission Inc (Active)
- Secondary Buy
- Secondary Buy
- 40538P6
- 7X677 - General Motors Llc (Active)
- Secondary Buy
- Secondary Buy
- 40538P6
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 40538P006
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5307-00-090-1593
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 0.141 Inches Nominal First Hole
- Cotter Pin Hole Diameter [ADDV]
- 0.076 Inches Nominal First Hole
- Material [MATT]
- Steel Comp 8735
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.312 Inches Stud Thread
- Hardness Rating [CQFM]
- 26.0 Rockwell C Minimum And 32.0 Rockwell C Maximum
- Surface Finish [CSYM]
- 63.0 Microinches Shank
- Material Document And Classification [MDCL]
- Ams 6320 Assn Std Single Material Response
- Shank Diameter [AAZE]
- 0.203 Inches Nominal
- Overall Length [ABHP]
- 1.500 Inches Nominal
- Thread Pitch Diameters [AAJE]
- +0.2839 To 0.2854 Inches Stud Thread
- Thread Quantity Per Inch [CMLP]
- 18 Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Uns Stud Thread
- Style Designator [STYL]
- Stepped
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.500 Inches Nominal Nut Thread
- Thread Length [AASA]
- 0.500 Inches Nominal Stud Thread
DLA Procurement Analysis 5307-00-090-1593
Management Data 5307-00-090-1593
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-00-090-1593
Freight Information 5307-00-090-1593
5307-00-090-1593 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-00-090-1593 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-00-090-1593 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-00-090-1593 is not classified as a special type of cargo when transported by water. 5307-00-090-1593 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-090-1593 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: