Premium Information is available for this item - Upgrade for $1 a day
5307-00-145-4724
Stepped Stud
5307001454724 001454724 AS25333P8 25333P8 25333P-008
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends on which the nominal diameter of one threaded section is greater than the other. The entire unthreaded portion must be of a single diameter equal to or smaller than the maximum major diameter of the larger threaded end. Includes radial grooves or thread reliefs. Excludes items with tapered threads. View more Stepped Stud
May 2023
14
Marketplace 5307-00-145-4724
Request a Quotation from participating marketplace vendors
Restrictions 5307-00-145-4724
5307-00-145-4724 is a Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5307-00-145-4724
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5307-00-145-4724
- Part Number
- Manufacturer
- Status
- AS25333P8
- Manufacturer
- 00198 - Pratt & Whitney Canada Cie (Active)
- Primary Buy
- Primary Buy
- 25333P8
- 00198 - Pratt & Whitney Canada Cie (Active)
- Secondary Buy
- Secondary Buy
- 25333P-008
- 00198 - Pratt & Whitney Canada Cie (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5307-00-145-4724
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Hardness Rating [CQFM]
- 26.0 Rockwell C Minimum And 32.0 Rockwell C Maximum
- Material [MATT]
- Steel
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.312 Inches Stud Thread
- Material Document And Classification [MDCL]
- Ams 7456 Assn Std Single Material Response
- Shank Diameter [AAZE]
- 0.244 Inches Minimum And 0.250 Inches Maximum
- Overall Length [ABHP]
- 1.178 Inches Minimum And 1.198 Inches Maximum
- Special Features [FEAT]
- Stud End Thread 0.008 In. Oversize
- Style Designator [STYL]
- Stepped
- Surface Treatment Document And Classification [STDC]
- Ams 2400 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Length [AASA]
- 0.428 Inches Minimum Stud Thread
- Thread Length [AASA]
- 0.490 Inches Minimum Nut Thread And 0.560 Inches Maximum Nut Thread
- Thread Pitch Diameters [AAJE]
- +0.2883/+0.2909 Inches Stud Thread
- Thread Quantity Per Inch [CMLP]
- 18 Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Uns Stud Thread
DLA Procurement Analysis 5307-00-145-4724
Management Data 5307-00-145-4724
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-00-145-4724
Freight Information 5307-00-145-4724
5307-00-145-4724 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-00-145-4724 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-00-145-4724 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-00-145-4724 is not classified as a special type of cargo when transported by water. 5307-00-145-4724 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-145-4724 August 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: