Premium Information is available for this item - Upgrade for $1 a day
5307-00-401-8575
Shouldered And Stepped Stud
5307004018575 004018575 272T6061001-001
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. All or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. It may be thread relieved. Excludes items with tapered threads. See also STUD, LOCKED IN. View more Shouldered And Stepped Stud
May 2023
2
Marketplace 5307-00-401-8575
Request a Quotation from participating marketplace vendors
Restrictions 5307-00-401-8575
5307-00-401-8575 is a Shouldered And Stepped Stud that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5307-00-401-8575
- US Air Force (FJGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FJKZ
Approved Sources 5307-00-401-8575
- Part Number
- Manufacturer
- Status
- 272T6061001-001
- Manufacturer
- 38597 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5307-00-401-8575
- Characteristic
- Specifications
- FIIG
- Specifications
- A051A0
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 0.090 Inches Nominal First Hole
- Distance From Cotter Pin Hole Centerline To Nut End [ADDU]
- 2.280 Inches Nominal Second Hole
- Cotter Pin Hole Diameter [ADDV]
- 0.075 Inches Minimum First Hole And 0.080 Inches Maximum First Hole
- Distance Across Flats [AWTQ]
- 0.437 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-S-6758 Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 4130
- Nominal Thread Size [CQJX]
- 0.250 Inches Nut Thread
- Nominal Thread Size [CQJX]
- 0.312 Inches Stud Thread
- Nut End Shank Length [ADDB]
- 0.520 Inches Nominal
- Nut End Shank Diameter [CTDT]
- 0.248 Inches Nominal
- Shoulder Diameter [AAVH]
- 0.562 Inches Nominal
- Shoulder Length [AAVK]
- 0.437 Inches Nominal
- Overall Length [ABHP]
- 2.371 Inches Nominal
- Stud End Shank Diameter [CSXH]
- 0.310 Inches Nominal
- Stud End Shank Length [CSJZ]
- 0.605 Inches Nominal
- Style Designator [STYL]
- Shouldered And Stepped
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Direction [AAJF]
- Right-Hand Nut Thread
- Thread Direction [AAJF]
- Right-Hand Stud Thread
- Thread Class [AAJD]
- 3A Nut Thread
- Thread Class [AAJD]
- 3A Stud Thread
- Thread Length [AASA]
- 0.227 Inches Minimum Stud Thread And 0.310 Inches Maximum Stud Thread
- Thread Length [AASA]
- 0.500 Inches Nominal Nut Thread
- Thread Quantity Per Inch [CMLP]
- 24 Stud Thread
- Thread Quantity Per Inch [CMLP]
- 28 Nut Thread
- Thread Series Designator [THSD]
- Unf Nut Thread
- Thread Series Designator [THSD]
- Unf Stud Thread
DLA Procurement Analysis 5307-00-401-8575
Management Data 5307-00-401-8575
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- KC
- B-57 CANBERRA
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5307-00-401-8575
Freight Information 5307-00-401-8575
5307-00-401-8575 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5307-00-401-8575 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5307-00-401-8575 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5307-00-401-8575 is not classified as a special type of cargo when transported by water. 5307-00-401-8575 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5307-00-401-8575 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: