Premium Information is available for this item - Upgrade for $1 a day
5310-00-063-2608
Flat Washer
5310000632608 000632608 27979-A-307P 307P
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
August 2023
3
Marketplace 5310-00-063-2608
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-063-2608 5+ Documents (More...)
NS Request Quotation Subscribe to View Vendor Details... 307P BEARING 1 EA NS Request Quotation 307P
BEARING 1 EA NS Request Quotation Updated Every Day 307P RQST NE Updated Every Day 3110-00-630-3227
Restrictions 5310-00-063-2608
5310-00-063-2608 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-063-2608
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-063-2608
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHD
Approved Sources 5310-00-063-2608
- Part Number
- Manufacturer
- Status
- 27979-A-307P
- Manufacturer
- 23515 - Frederick Custom Machining Inc (Active)
- Primary Buy
- Primary Buy
- 307P
- 23515 - Frederick Custom Machining Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-00-063-2608
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Blank Rectangular
- Hole Diameter [AAUB]
- 0.900 Inches Nominal
- Material [MATT]
- Copper Alloy Overall
- Outside Left Corner Chamfer Angle [CQZT]
- 60.0 Degrees Nominal
- Overall Diameter [ADAV]
- 2.249 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Special Features [FEAT]
- Chamfer Extends Enter Width Of Periphery
- Surface Finish [CSYM]
- 32.0 Microinches Inner
- Surface Finish [CSYM]
- 32.0 Microinches Outer
- Surface Finish [CSYM]
- 32.0 Microinches Top
- Surface Finish [CSYM]
- 8.0 Microinches Bottom
- Thickness [ABNM]
- 0.377 Inches Nominal
DLA Procurement Analysis 5310-00-063-2608
Management Data 5310-00-063-2608
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-063-2608
Freight Information 5310-00-063-2608
5310-00-063-2608 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-063-2608 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-063-2608 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-00-063-2608 is not classified as a special type of cargo when transported by water. 5310-00-063-2608 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-063-2608
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-00-063-2608 2 Records
Contracting Technical Data File (CTDF) 5310-00-063-2608 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: