Premium Information is available for this item - Upgrade for $1 a day
5310-00-290-7868
Flat Washer
5310002907868 002907868 M36538-3BALT1PC620-29 M36538-3CPC620-28 M36538-3AALT1PC620-28 M36538-3PC620-28
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
24
Marketplace 5310-00-290-7868
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-290-7868 5+ Documents (More...)
Flat Washer 5310002907868 002907868 Upgrade for $1 a day Upgrade your Account Upgrade 5310-00-290
-7868Flat Washer5310002907868 002907868 M36538 -3BALT1PC620-29 M36538-3CPC620-28 M36538-3AALT1PC620-28
Flat Washer 5310002907868 002907868 5310-00-290-7868 5310002907868 002907868 is a washer having
Flat Washer 5310002907868 002907868 5310-00-290-7868 5310002907868 002907868 is a washer having
Flat Washer 5310002907868 002907868 5310-00-290-7868 5310002907868 002907868 is a washer having
Commercial Supplier with the Cage Code 1S0A0 and is tracked by Dun & Bradstreet under DUNS Number 002907868
Restrictions 5310-00-290-7868
5310-00-290-7868 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5310-00-290-7868
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-290-7868
- US Army (A919)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- NIZD
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5310-00-290-7868
- Part Number
- Manufacturer
- Status
- M36538-3BALT1PC620-29
- Manufacturer
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
- M36538-3CPC620-28
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
- M36538-3AALT1PC620-28
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
- M36538-3PC620-28
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 5310-00-290-7868
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Hardness Rating [CQFM]
- 55.0 Shore Durometer A Minimum And 65.0 Shore Durometer A Maximum
- Hole Diameter [AAUB]
- 1.000 Inches Nominal
- Material [MATT]
- Rubber Synthetic Overall
- Minimum Tensile Strength [CQBC]
- 1500 Pounds Per Square Inch
- Material Document And Classification [MDCL]
- 417,Ty S,Cl Sc,Gr Sc615 Mil Std Single Material Response Overall
- Overall Diameter [ADAV]
- 1.625 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Thickness [ABNM]
- 0.062 Inches Nominal
Weapon Systems (WSDC) 5310-00-290-7868
DLA Procurement Analysis 5310-00-290-7868
Management Data 5310-00-290-7868
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-00-290-7868
Freight Information 5310-00-290-7868
5310-00-290-7868 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-00-290-7868 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-00-290-7868 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-290-7868 is not classified as a special type of cargo when transported by water. 5310-00-290-7868 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5310-00-290-7868 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: