Premium Information is available for this item - Upgrade for $1 a day
5310-00-755-7283
Sleeve Nut
5310007557283 007557283 12339397-1 5581714 J1032 5310PL0788317
An internally threaded item with a cylindrical and/or square, hexagonal, octagonal, or dodecagonal outer periphery (parallel to the threaded axis) a portion(s) of which may or may not be enlarged, forming a flange(s) and/or shoulder(s). Items not having an enlarged outer portion may be threaded, a part of the full length, or tapped from both ends. Items having an enlarged outer portion (flange(s) or shoulder(s)) may be threaded the full length, threaded a part of the full length, or tapped from both ends. Items tapped from both ends shall have either right-hand threads on both ends or left-hand threads on both ends. For items conforming to any of the above and having a length overall exceeding two times the largest outside diameter or width across flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. For items with an outside contour that is the same the full length, having a continuous thread through its entire length, and the length does not exceed two times the diameter or width across the flats use NUT (1), PLAIN (as modified). Excludes NUT (1), PLAIN, CAP. See also TURNBUCKLE BODY. View more Sleeve Nut
November 2023
17
Marketplace 5310-00-755-7283
Request a Quotation from participating marketplace vendors
Related Documents 5310-00-755-7283 5+ Documents (More...)
J1032 BEARING,ROLLER,NEEDLE 14 EA NS Request Quotation Subscribe to View Vendor Details...
Sleeve Nut 5310007557283 007557283,12339397-1 Upgrade your Account Upgrade 5310-00-755-7283Sleeve
Repair Parts And Tools Volume 2 Page 883 9629 475 28 19207 12339395 3020-01-198-0633 35 32 19207 12339397-1
5310-00-755-7283 199 5 19207 12339397-3 5310-01-231-7455 398 https//www.nsnlookup.com /fsg-53/fsc-
5310-00-755-7283 199 5 19207 12339397-3 5310-01-231-7455 398 6 19207 12339397-4 5340-01-213-4662 80
5310-00-755-7283 199 5 19207 12339397-3 5310-01-231-7455 398 6 19207 12339397-4 5340-01-213-4662 80
Repair Parts And Tools M1113 M1114 Page 1325 167E 8 19207 12339387-2 2540-01-198-7581 166A 29 19207 12339397-1
Restrictions 5310-00-755-7283
5310-00-755-7283 is a Sleeve Nut that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-00-755-7283
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-00-755-7283
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZBD
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2012
- Supplementary Collaborators:
- GTKE
- Poland (WP01)
- Effective Date:
- 1 Jun 2011
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5310-00-755-7283
- Part Number
- Manufacturer
- Status
- 12339397-1
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 5581714
- 34623 - Am General Llc (Active)
- Secondary Buy
- Secondary Buy
- J1032
- 00613 - Usm Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 5310PL0788317
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5310-00-755-7283
- Characteristic
- Specifications
- FIIG
- Specifications
- A021A0
- Cross-Sectional Shape [ANLR]
- Round Overall
- End Item Identification [AGAV]
- W/S:Truck, Utility, Cargo Troop Carrier, 5/4-Ton W/E (M998); Helicopter, Sea Knight H-46; Truck, Vehicle System, 1 1/4-Ton (Hmmwv); Truck, Ambulance, 4-Litter, Armored, 1 1/4 Ton Hmmwv
- Flange Diameter [ABKK]
- 0.750 Inches Nominal
- Flange Thickness [ABKU]
- 0.080 Inches Nominal
- Hardness Rating [CQFM]
- 55.0 Shore Durometer A Minimum And 65.0 Shore Durometer A Maximum
- Material [MATT]
- Rubber Synthetic Overall
- Nominal Thread Size [CQJX]
- 0.190 Inches
- Nut Diameter [ACTD]
- 0.377 Inches Nominal
- Nut Length [ACVN]
- 0.620 Inches Nominal
- Nut Style [ACTA]
- Sleeve
- Special Features [FEAT]
- Grip Range 0.030 To 0.227
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Series [BZRR]
- Unf
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5310-00-755-7283
DLA Procurement Analysis 5310-00-755-7283
- Last Stock Position:
- 8923 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-00-755-7283
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2022
- Department of the Army (DA)
- EA
- Subscribe
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Navy (DN)
- N
- V
- Discontinued Without Replacement
- V
- Department of the Navy (DN)
- N
- X
- Formerly 5340
- X
- Defense Logistics Agency (DS)
- I
- X
- Formerly 5340
- X
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5310-00-755-7283
Freight Information 5310-00-755-7283
5310-00-755-7283 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 107340. A Sub NMFC of X. It has a NMFC Description of TURNBUCKLES/SLEEVE NUTS NOI I/S. 5310-00-755-7283 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55190 which rates the freight between FCL and LCL. 5310-00-755-7283 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5310-00-755-7283 is not classified as a special type of cargo when transported by water. 5310-00-755-7283 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-00-755-7283
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5310-00-755-7283 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: