Premium Information is available for this item - Upgrade for $1 a day
5310-01-194-6453
Flat Washer
5310011946453 011946453 944045C1 51410
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
8
Marketplace 5310-01-194-6453
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-194-6453 5+ Documents (More...)
WASHER,FLAT 7 EA NS Request Quotation Subscribe to View Vendor Details... 51410 WASHER,FLAT 8 EA NS
Flat Washer 5310011946453 011946453,944045C1 $1 a day Upgrade your Account Upgrade 5310-01-194-
/fsg-47/fsc-4730/us
Flat Washer 5310011946453 011946453,944045C1 $1 a day Upgrade your Account Upgrade 5310-01-194-
6453Flat Washer5310011946453 011946453 944045C1 51410 WASHER,FLAT 7 EA NS Request Quotation Subscribe
/fsg-53/fsc-5340/fr
Flat Washer 5310011946453 011946453,944045C1 $1 a day Upgrade your Account Upgrade 5310-01-194-
6453Flat Washer5310011946453 011946453 944045C1 51410 WASHER,FLAT 7 EA NS Request Quotation Subscribe
Frequently Asked Questions (FAQ) for CAGE 51410 What is CAGE Code 51410?
$1 a day Upgrade your Account Upgrade 5310-01-194-6453Flat Washer5310011946453 011946453 944045C1 51410
Restrictions 5310-01-194-6453
5310-01-194-6453 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-194-6453
- US Army (A919)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZCTBD
- US Marine Corps (MC47)
- Effective Date:
- 1 Aug 2005
Approved Sources 5310-01-194-6453
- Part Number
- Manufacturer
- Status
- 944045C1
- Manufacturer
- 45RP7 - Dressta North America Ltd (Active)
- Primary Buy
- Primary Buy
- 51410
- 99688 - Bergstrom Inc (Active)
- Secondary Buy
- Secondary Buy
- 944045C1
- 0SAT8 - Komatsu America Corp. (Active)
- Secondary Buy
- Secondary Buy
- 944045C1
- 03AT8 - J H Service Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-194-6453
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Surface Treatment [SFTT]
- Zinc Overall
- Hole Diameter [AAUB]
- 0.203 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 0.500 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.047 Inches Nominal
Weapon Systems (WSDC) 5310-01-194-6453
DLA Procurement Analysis 5310-01-194-6453
- Last Stock Position:
- 11 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-194-6453
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 0
- Non-combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5310-01-194-6453
Freight Information 5310-01-194-6453
5310-01-194-6453 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-194-6453 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-194-6453 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-194-6453 is not classified as a special type of cargo when transported by water. 5310-01-194-6453 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-194-6453
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-194-6453 1 Records
Contracting Technical Data File (CTDF) 5310-01-194-6453 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: