Premium Information is available for this item - Upgrade for $1 a day
5310-01-325-3447
Flat Washer
5310013253447 013253447 AN960C416L 820-5787500ITEM51
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
May 2023
18
Marketplace 5310-01-325-3447
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5310-01-325-3447 5+ Documents (More...)
AN960C416L WASHER,FLAT,AIRCRAF 561 EA NS Request Quotation Subscribe to View Vendor Details...
AN960C416L WASHER,FLAT,AIRCRAF 564 EA NS Request Quotation Subscribe to View Vendor Details...
AN960C416L WASHER,FLAT,AIRCRAF 561 EA NS Request Quotation Subscribe to View Vendor Details...
AN960C416L WASHER,FLAT,AIRCRAF 564 EA NS Request Quotation Subscribe to View Vendor Details... https/
AN960C416L WASHER,FLAT 560 EA NS Request Quotation Subscribe to View Vendor Details... 911292 WASHER,
FLAT 58 EA NS Request Quotation AN960-C416L WASHER,FLAT 2400 EA NS Request Quotation AN960C416L WASHER
AN960C416L BEARING,BALL,DUPLEX 350 PR NS Request Quotation Subscribe to View Vendor Details...
AN960C416L BEARING,BALL,DUPLEX 1 PR NS Request Quotation Subscribe to View Vendor Details...
Restrictions 5310-01-325-3447
5310-01-325-3447 is a Flat Washer that has critical features such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5310-01-325-3447
- US Navy (N1HE)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
- Brazil (YA01)
- Effective Date:
- 1 Aug 2010
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- Malaysia (YW01)
- Effective Date:
- 1 Mar 2002
- Australia (ZA01)
- Effective Date:
- 1 Nov 2010
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Dec 1995
- Portugal (ZP01)
- Effective Date:
- 1 Apr 2006
- Denmark (ZS01)
- Effective Date:
- 1 Jul 2014
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5310-01-325-3447
- Part Number
- Manufacturer
- Status
- AN960C416L
- Manufacturer
- 79788 - Eagle-Picher Industries Inc (Active)
- Incomplete Reference
- Incomplete Reference
- 820-5787500ITEM51
- 53711 - Naval Sea Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 5310-01-325-3447
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Criticality Code Justification [CRTL]
- Zzzy
- Reference Number Differentiating Characteristics [ZZZY]
- Material Will Be In Accordance With Ships Parts Control Center Activity Hx Quality Control,Manufacturing And Testing Specifications
DLA Procurement Analysis 5310-01-325-3447
Management Data 5310-01-325-3447
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- X3
- Nuclear Reactor Plant (NRP) material under the technical cognizance of the NAVSEA 08 special designed, manufactured and/or treated for use in a NRP or controls thereof. This category includes all other NRP items which are not coded X2 or X4.
- Issue, Repair, Requisition Restriction Code:
- BL
- Submit/refer requisitions to NAVICP MECH. Centralized control for issue of repair parts for specific programs/equipment
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5310-01-325-3447
Freight Information 5310-01-325-3447
5310-01-325-3447 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5310-01-325-3447 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 5310-01-325-3447 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5310-01-325-3447 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-325-3447 is not classified as a special type of cargo when transported by water. 5310-01-325-3447 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-325-3447
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 5.0" H x 3.0" W x 0.5" L
- --
- --
- --
- Any Suitable Process
- 5.0" H x 3.0" W x 0.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- --
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box