Premium Information is available for this item - Upgrade for $1 a day

5310-01-435-8312

Flat Washer

5310014358312 014358312 98025A133 3257 98025A033

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-01-435-8312 WASHER,FLAT 5310014358312 014358312

Managed by United States
NSN Created on 4 Sep 1996
Data Last Changed
November 2023
NATO Update Count
6
NATO Data Quality
AAGR Style 1 for 5310-01-435-8312 1/3
NSN 5310-01-435-8312 (Identification) 1/3
ABMW Style 1 for 5310-01-435-8312 2/3
NSN 5310-01-435-8312 (Identification) 2/3
ABMX Style 1 for 5310-01-435-8312 3/3
NSN 5310-01-435-8312 (Identification) 3/3

5310-01-435-8312 Stock and Availability Marketplace 5310-01-435-8312

5310-01-435-8312 Related Documents Related Documents 5310-01-435-8312 5+ Documents (More...)

CAGE 99JRH Fundacja "Moje Podlatsie. in Grajewo, Podlaskie Poland
CAGE Z3C78 Computer Software & Peripherals in Canning Vale, Wa Australia
CAGE 0JFV2 New York Renovation Inc in Flushing, NY United States
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 3257
RUDDER STOCK 2 EA NS Request Quotation Subscribe to View Vendor Details... 3257 RUDDER STOCK RQST NS
Request Quotation Subscribe to View Vendor Details... 3257 RUDDER STOCK 20 EA NS Request Quotation FedMall

5310-01-435-8312 Demil Restrictions 5310-01-435-8312

DEMIL: A | DEMILI: 1 | CRITICALITY: X | HMIC: N | PMIC: A | EDC: | ADPEC: 0

5310-01-435-8312 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.

5310-01-435-8312 End Users End Users 5310-01-435-8312

US Army (A919)
Effective Date:
1 Jun 2008
Supplementary Receivers:
AZCL
US Air Force (FXGI)
Effective Date:
1 Mar 2006
Former MOE Rule:
FXKZ
US Marine Corps (MC47)
Effective Date:
1 Mar 2006
Former MOE Rule:
MC10
US Navy (N9BZ)
Effective Date:
1 Mar 2006
Supplementary Collaborators:
HD

5310-01-435-8312 Manufacturers Approved Sources 5310-01-435-8312

5310-01-435-8312 Technical Data Datasheet 5310-01-435-8312

Characteristic
Specifications
FIIG
A022B0
Center Hole Shape Style [ABMX]
Round
Cross-Sectional Shape Style [AAGR]
Rectangular
Hardness Rating [CQFM]
43.0 Rockwell C Minimum And 49.0 Rockwell C Maximum
Hole Diameter [AAUB]
0.526 Inches Nominal
Material [MATT]
Steel Overall
Overall Diameter [ADAV]
1.092 Inches Nominal
Peripheral Shape Style [ABMW]
Round
Surface Treatment [SFTT]
Zinc Overall
Thickness [ABNM]
0.153 Inches Minimum And 0.213 Inches Maximum

5310-01-435-8312 Weapon Systems (WSDC) Weapon Systems (WSDC) 5310-01-435-8312

5310-01-435-8312 Stock, Inventory and Procurement DLA Procurement Analysis 5310-01-435-8312

Last Stock Position:
12317 In Stock
DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

5310-01-435-8312 Management Data Management Data 5310-01-435-8312

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Oct 2022
Department of the Navy (DN)
EA
Subscribe
Oct 2021
Defense Logistics Agency (DS)
EA
Subscribe
Oct 2020
Defense Logistics Agency (DS)
EA
Subscribe
Oct 2019
Department of the Air Force (DF)
EA
Subscribe

Army Army

Materiel Category and Inventory Manager:
T
Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity:
2
Stock Fund Secondary Items
Management Inventory Segment:
2
Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
Weapons System / End Item / Homogeneous Group:
00
DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements:
X
Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.

Air Force Air Force

Fund:
SF
Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
Budget:
9
57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
Aggregation Code:
SX
SICA RESIDUAL MMAC-OC-ALC
Price Validation Code:
N
The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ā€œLā€ or ā€œFā€, then it must be evaluated locally where purchased or fabricated.
Expendability
Recoverability
Repairability:
N
Expendable. Condemn at User. Stock Fund (except Munitions).

Navy Navy

Cognizance:
9B
Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg

Marine Corps Marine Corps

Stores Account:
1
Stock Fund Account Item
Combat Essentiality:
5
Critical Repair Part to a Combat Essential End Item
Echelon Management:
B2
Operational Test:
No Special Procedures

5310-01-435-8312 Related Items NATO Stock Numbers Related to 5310-01-435-8312

5310-01-435-8312 Freight Data Freight Information 5310-01-435-8312

5310-01-435-8312 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-435-8312 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-435-8312 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-435-8312 is not classified as a special type of cargo when transported by water. 5310-01-435-8312 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

5310-01-435-8312 Packaging Data Packaging Data 5310-01-435-8312

Responsible Activity
Packaging Data Source
Primary Inventory Control Activity (PICA)
--

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation
--
--
Bare Metal Item
2lb or less, one dimension 2" or less, other dimensions less than 24"
Above 110G
No Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying
--
--
--
--
Physical Protection
Any Suitable Process
Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking
No Requirement
No Requirement
No Requirement
Not Applicable
Any Suitable Container
No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container
--

5310-01-435-8312 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 5310-01-435-8312 February 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
F

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: