Premium Information is available for this item - Upgrade for $1 a day
5310-01-476-6222
Flat Washer
5310014766222 014766222 53846-017 8100-1251-0310 PC NO 350 8100-1251-0310 5346-017
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
3
Marketplace 5310-01-476-6222
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-476-6222 5+ Documents (More...)
53846-017 8100-1251-0310 PC NO 350 8100-1251-0310 5346-017 A washer having a centrally located hole
day Upgrade your Account Upgrade 5310-01-476-6222Flat Washer5310014766222 014766222 53846-017 8100-1251
5346-017 A washer having a centrally located hole with a solid or laminated PC NO 350 8100-1251-0310
53846-017 8100-1251-0310 PC NO 350 8100-1251-0310 5346-017 A washer having a centrally located hole
53846-017 8100-1251-0310 PC NO 350 8100-1251-0310 5346-017 A washer having a centrally located hole
5346-017 A washer having a centrally located hole with a solid or laminated PC NO 350 8100-1251-0310
5346-017 A washer having a centrally located hole with a solid or laminated PC NO 350 8100-1251-0310
53846-017 8100-1251-0310 PC NO 350 8100-1251-0310 5346-017 A washer having a centrally located hole
5346-017 A washer having a centrally located hole with a solid or laminated PC NO 350 8100-1251-0310
53846-017 8100-1251-0310 PC NO 350 8100-1251-0310 5346-017 A washer having a centrally located hole
Restrictions 5310-01-476-6222
5310-01-476-6222 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5310-01-476-6222
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5310-01-476-6222
- Part Number
- Manufacturer
- Status
- 53846-017
- Manufacturer
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
- 8100-1251-0310 PC NO 350
- 70876 - Bath Iron Works Corporation (Active)
- Secondary Buy
- Secondary Buy
- 8100-1251-0310
- 70876 - Bath Iron Works Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5346-017
- 70876 - Bath Iron Works Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5310-01-476-6222
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Special Features [FEAT]
- Pivot Latch Handle;Corrosion Resistant; Ff-W-92
Weapon Systems (WSDC) 5310-01-476-6222
DLA Procurement Analysis 5310-01-476-6222
- Last Stock Position:
- 183 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-476-6222
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-476-6222
Freight Information 5310-01-476-6222
5310-01-476-6222 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5310-01-476-6222 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5310-01-476-6222 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5310-01-476-6222 is not classified as a special type of cargo when transported by water. 5310-01-476-6222 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5310-01-476-6222 3 Records
Contracting Technical Data File (CTDF) 5310-01-476-6222 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: