Premium Information is available for this item - Upgrade for $1 a day
5310-01-481-5484
Flat Washer
5310014815484 014815484 42014-010 8100-1253-0238 PT NO 82 8100-1252-0236 PT NO 840 8100-1253-0238
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
November 2023
2
Marketplace 5310-01-481-5484
Request a Quotation from participating marketplace vendors
Related Documents 5310-01-481-5484 5+ Documents (More...)
A headed fastening device having a solid cylindrical or tubular body with PT NO 554 8100-1253-0238
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-481-5484 Flat Washer 5310014815484 014815484,42014
A headed fastening device having a solid cylindrical or tubular body with PT NO 554 8100-1253-0238
/fsg-53/fsc-5310/us 5310-01-481-5484 Flat Washer 5310014815484 014815484,42014-010 day Upgrade your
PT NO 554 8100-1253-0238 A nut, flat on top and bottom having 6 flat sides. day Upgrade your Account
/fsg-53/fsc-5310/us 5310-01-481-5484 Flat Washer 5310014815484 014815484,42014-010 day Upgrade your
A nut, flat on top and bottom having 6 flat sides. day Upgrade your Account PT NO 554 8100-1253-0238
https//www.nsnlookup.com /fsg-53/fsc-5310/us 5310-01-481-5484 Flat Washer 5310014815484 014815484,42014
Flat Washer 5310014815484 014815484,42014-010 Upgrade 5310-01-481-5484Flat Washer5310014815484
014815484 42014-010 8100-1253-0238 PT NO 82 8100-1252-0236 -0238 PT NO 82 70876 - Bath Iron Works Corporation
Restrictions 5310-01-481-5484
5310-01-481-5484 is a Flat Washer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5310-01-481-5484
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5310-01-481-5484
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHD
Approved Sources 5310-01-481-5484
- Part Number
- Manufacturer
- Status
- 42014-010
- Manufacturer
- 70876 - Bath Iron Works Corporation (Active)
- Primary Buy
- Primary Buy
- 8100-1253-0238 PT NO 82
- 70876 - Bath Iron Works Corporation (Active)
- Secondary Buy
- Secondary Buy
- 8100-1252-0236 PT NO 840
- 70876 - Bath Iron Works Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 8100-1253-0238
- 70876 - Bath Iron Works Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5310-01-481-5484
- Characteristic
- Specifications
- FIIG
- Specifications
- A022B0
- Material [MATT]
- Copper Alloy 464 Overall
- Material Document And Classification [MDCL]
- Qq-B-639,Alloy 464 Fed Spec Single Material Response Overall
- Hole Diameter [AAUB]
- 0.594 Inches Nominal
- Peripheral Shape Style [ABMW]
- Round
- Overall Diameter [ADAV]
- 1.250 Inches Nominal
- Center Hole Shape Style [ABMX]
- Round
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Thickness [ABNM]
- 0.125 Inches Nominal
- End Item Identification [AGAV]
- Scuttle:Marine Hardware & Hull Doors
Weapon Systems (WSDC) 5310-01-481-5484
DLA Procurement Analysis 5310-01-481-5484
- Last Stock Position:
- 4 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5310-01-481-5484
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5310-01-481-5484
Freight Information 5310-01-481-5484
5310-01-481-5484 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5310-01-481-5484 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5310-01-481-5484 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5310-01-481-5484 is not classified as a special type of cargo when transported by water. 5310-01-481-5484 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5310-01-481-5484
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5310-01-481-5484 2 Records
Contracting Technical Data File (CTDF) 5310-01-481-5484 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: