5310-14-276-4255

Flat Washer

5310142764255 142764255 1239

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer

5310-14-276-4255 WASHER,FLAT 5310142764255 142764255

Managed by France
NSN Created on 1 Jan 1971
Data Last Changed
July 2023
NATO Update Count
1
NATO Data Quality
5310-14-276-4255 WASHER,FLAT 5310142764255 142764255 1/1
NSN 5310-14-276-4255 (Generic Image) 1/1

5310-14-276-4255 Stock and Availability Marketplace 5310-14-276-4255

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5310-14-276-4255 RQST NE eBay
eBay Updated Every Day
5310-14-276-4255 RQST eBay
Amazon Updated Every Day
5310-14-276-4255 RQST NE Amazon

5310-14-276-4255 Related Documents Related Documents 5310-14-276-4255 5+ Documents (More...)

3120-99-763-4217 3120997634217 997634217 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.
5305-01-300-8917 5305013008917 013008917 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
6615-14-215-0007 6615142150007 142150007 is a control designed with an airtight case, consisting of a bellows or diaphragm which responds to changes in barometric pressure and is used in conjunction with an automatic pilot to maintain a desired altitude.

5310-14-276-4255 Demil Restrictions 5310-14-276-4255

DEMIL: | DEMILI: | CRITICALITY: | HMIC: | PMIC: | EDC: | ADPEC:

5310-14-276-4255 is a Flat Washer

5310-14-276-4255 End Users End Users 5310-14-276-4255

Spain (YB)
France (ZF)

5310-14-276-4255 Manufacturers Approved Sources 5310-14-276-4255

5310-14-276-4255 Related Items NATO Stock Numbers Related to 5310-14-276-4255