5310-99-122-6474

Flat Washer

5310991226474 991226474 BS4320-TABLE 1 FORM A M6 75300601010159 390971X1 Z/520/0062/3102 143679 8479 ITEM 4 ND37412/4 SM10500-106 1416 991-4-12527-002 991/4/01677/013 1660-014352 GM-E-112920 ITEM 27 305700-16 AB/01/14/2308 6449K239/10 ITEM 140 FV 2085362 ITEM 28 MW106 T5013 001291426 PART 224 GHF314 WA106043 5A0642-0012-000 ITEM 74 5A0642-0012-000/74 HM5676ITEM81

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer