Premium Information is available for this item - Upgrade for $1 a day
5315-00-276-5464
Headed Grooved Pin
5315002765464 002765464 5192141 5F9199 CL6984 RC25022
A cylindrically-shaped headed item, having circular or longitudinal groove(s). View more Headed Grooved Pin
Managed by United States
NSN Created on 1 Jan 1961
Data Last Changed
August 2023
August 2023
NATO Update Count
13
13
NATO Data Quality
Marketplace 5315-00-276-5464
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5315-00-276-5464 5+ Documents (More...)
7195-00-519-2141 7195005192141 005192141
5310-01-519-2141 5310015192141 015192141 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
8430-99-519-2141 8430995192141 995192141 is a foot covering made of leather, rubber or other material reaching to mid-leg, designed to protect the foot and leg. excludes boots, knee and boots, hip.
270-3878 Automotive Air Brake Hose Dummy Coupling FR25199RNCC: 5 | RNVC: 9 | DAC: 6 1 Jan 1963 5315-00-276-5464
5962-14-519-2141 5962145192141 145192141
Restrictions 5315-00-276-5464
5315-00-276-5464 is a Headed Grooved Pin that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5315-00-276-5464
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHD
- France (ZF01)
- Effective Date:
- 1 Oct 1996
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5315-00-276-5464
- Part Number
- Manufacturer
- Status
- 5192141
- Manufacturer
- 72582 - Rolls-Royce Solutions America Inc (Active)
- Primary Buy
- Primary Buy
- 5F9199
- 11083 - Caterpillar Inc (Active)
- Primary Buy
- Primary Buy
- CL6984
- 77237 - Dana Off Highway Products, Llc (Active)
- Secondary Buy
- Secondary Buy
- RC25022
- 18990 - Eagle Crusher Co Inc (Active)
- Secondary Buy
- Secondary Buy
- 5192141
- 7X677 - General Motors Llc (Active)
- Secondary Buy
- Secondary Buy
- 5192141
- 24617 - General Motors Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CL6984
- 77873 - Rockford Powertrain Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- CL6984
- 40152 - Vme Americas Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5315-00-276-5464
- Characteristic
- Specifications
- FIIG
- Specifications
- A212A0
- Effective Length [ABNZ]
- 0.9117 Inches Minimum And 0.9323 Inches Maximum
- Diameter [ABMZ]
- 0.371 Inches Minimum And 0.373 Inches Maximum
- First End Style [AAGZ]
- Square
- Hardness Rating [CQFM]
- 58.0 Rockwell C Minimum Overall And 39.0 Rockwell C Maximum Overall
- Head Style [AASK]
- Flat
- Height [HGTH]
- 0.094 Inches Nominal
- Material [MATT]
- Steel Overall
- Pin Head Diameter [CRRG]
- 0.500 Inches Nominal
- Undercut Diameter [ABPA]
- 0.297 Inches Minimum And 0.311 Inches Maximum
- Under Head Length [ABPB]
- 1.094 Inches Nominal
- Undercut Width [ABPC]
- 0.051 Inches Minimum And 0.057 Inches Maximum
- Style Designator [STYL]
- Groove
Weapon Systems (WSDC) 5315-00-276-5464
DLA Procurement Analysis 5315-00-276-5464
Management Data 5315-00-276-5464
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5315-00-276-5464
5315-40-000-6158 5315-17-110-6161 5315-12-349-6941 5315-23-110-7628 5315-99-836-2503 5315-66-153-4960 5315-37-504-6219 5315-22-623-1319 5315-99-553-0430 5315-21-330-9668 5315-99-416-1565 5315-12-182-8675 5315-12-328-4353 5315-37-506-1362 5315-13-121-3108 5315-99-220-9985 5315-21-904-4809 5315-12-351-5814
Freight Information 5315-00-276-5464
5315-00-276-5464 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5315-00-276-5464 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5315-00-276-5464 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5315-00-276-5464 is not classified as a special type of cargo when transported by water. 5315-00-276-5464 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5315-00-276-5464
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5315-00-276-5464 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: