5315-21-867-5794

2040-21-896-1858 2040218961858 218961858 is a device, fixed or portable, serving to cushion the shocks and protect the hull when a vessel comes in contact with a wharf or another vessel.

5330-01-288-7144 5330012887144 012887144 is a circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. it may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section); or (2) any shredded metal or metal foil type metallic or semimetallic rings. excludes felt items but includes multimaterial items in which one of the materials is felt. for solid (without joints) nonmetallic items with a square or rectangular cross section, see washer (as modified) and gasket. for rubber items specifically designed for weather-proofing doors, windows, chests, and the like see seal, nonmetallic angle; seal, nonmetallic channel; and seal, nonmetallic, special shaped section. for circular (with aperature) nonmetallic items with a solid round cross-section see o-ring. excludes cup, compression; gasket; washer (as modified); and felt, mechanical, preformed.

Account Upgrade 5950-14-306-5247Power Transformer5950143065247 143065247 NO PRIMARY REF14-306-5247 12-39
-24A 12-39-24 12-39-24-01 85-692-8737 85-691-9059 A transformer consisting of one or more primary winding
(Ste Francaise (Replaced) Canceled/Obsolete RNCC 5 RNVC 9 DAC 4 12-39-24 F6306 - S.F.E.N.A.

1010-99-764-7424 1010997647424 997647424 BOLT

5310-99-528-4171 5310995284171 995284171 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.