5340-00-005-1084

Manual Control Lever

5340000051084 000051084 2624327

A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK. View more Manual Control Lever

5340-00-005-1084 LEVER,MANUAL CONTROL 5340000051084 000051084

Managed by United States
NSN Created on 16 Jun 1972
Data Last Changed
January 2023
NATO Update Count
9
NATO Data Quality
5340-00-005-1084 LEVER,MANUAL CONTROL 5340000051084 000051084 1/1
NSN 5340-00-005-1084 (Generic Image) 1/1

5340-00-005-1084 Stock and Availability Marketplace 5340-00-005-1084

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5340-00-005-1084 RQST NE eBay
eBay Updated Every Day
5340-00-005-1084 RQST eBay
Amazon Updated Every Day
5340-00-005-1084 RQST NE Amazon

5340-00-005-1084 Related Documents Related Documents 5340-00-005-1084 3+ Documents (More...)

1560-01-262-4327 1560012624327 012624327 is a fixed vertical airfoil, forming a part of the main directional control surfaces, perpendicular or approximately perpendicular to the longitudinal axis of an aircraft, guided missile, or rocket. the functional purpose of the vertical stabilizer is to maintain uniformity of motion in relation to the longitudinal axis in flight.
5365-00-262-4327 5365002624327 002624327 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5340-00-005-1084 Demil Restrictions 5340-00-005-1084

DEMIL: A | DEMILI: 1 | CRITICALITY: X | HMIC: P | PMIC: A | EDC: | ADPEC: 0

5340-00-005-1084 is a Manual Control Lever that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.

5340-00-005-1084 HTS and ScheduleB Import and Export 5340-00-005-1084

5340-00-005-1084 Manufacturers Approved Sources 5340-00-005-1084

5340-00-005-1084 Related Items NATO Stock Numbers Related to 5340-00-005-1084