5340-01-498-1136

: 512544244-UID-00RNCC: 5 | RNVC: 9 | DAC: 512364610-27RNCC: 5 | RNVC: 9 | DAC: 1 1 Jun 2001 5340-01-498-1136

6680-15-185-0021 6680151850021 151850021 ACCELEROMETRO

5365-12-185-0021 5365121850021 121850021 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

4730-01-185-0021 4730011850021 011850021 is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. the inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.

5325-00-185-0021 5325001850021 001850021