Premium Information is available for this item - Upgrade for $1 a day
5340-01-498-2760
Combination Lock
5340014982760 014982760 FF-L-2890 FFL2890-II-1 CL D FF-L-2890 TY II CL D STRIKE 1
Managed by United States
NSN Created on 20 Jun 2002
Data Last Changed
August 2023
August 2023
NATO Update Count
4
4
NATO Data Quality
Marketplace 5340-01-498-2760
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-498-2760 5+ Documents (More...)
5310-33-153-7644 5310331537644 331537644 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
for $1 a day Upgrade your Account Upgrade 5340-01-498-2759Combination Lock5340014982759 014982759 FF-L-2890
FF-L-2890 TY II CL N STRIKE 1 Managed by United States NSN Created on 20 Jun 2002 Data Last Changed
FF-L-2890 COMBINATION LOCK 4 EA NS Request Quotation Subscribe to View Vendor Details... 5340-01-498-
FF-L-2890 TY II CL N STRIKE 1 Managed by United States NSN Created on 20 Jun 2002 Data Last Changed
FF-L-2890 COMBINATION LOCK 4 EA NS Request Quotation Subscribe to View Vendor Details... 5340-01-498-
5340-01-678-6420 5340016786420 016786420 is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. excludes clamp, rim clenching.
5895-00-996-1660 5895009961660 009961660 CLAMP,RECEIVER MODU
5340-01-678-6291 5340016786291 016786291 is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. excludes clamp, rim clenching.
Restrictions 5340-01-498-2760
5340-01-498-2760 is a Combination Lock that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-498-2760
- US Army (A919)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- A187
- US Coast Guard (C918)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- C004
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTJNHD
- Spain (YB01)
- Effective Date:
- 1 Feb 2004
Approved Sources 5340-01-498-2760
- Part Number
- Manufacturer
- Status
- FFL2890-II-1 CL D
- Manufacturer
- 81348 - Federal Specifications (Active)
- Definitive Standard
- Definitive Standard
- FF-L-2890
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- FF-L-2890 TY II CL D STRIKE 1
- 81348 - Federal Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-01-498-2760
- Characteristic
- Specifications
- FIIG
- Specifications
- A23900
- Special Features [FEAT]
- This Is The Cdx-09 Version;Keyless Life Safety Feature With Drill Resistant Mounting Plate For Single Or Double Door In-Swing Mortise
Weapon Systems (WSDC) 5340-01-498-2760
DLA Procurement Analysis 5340-01-498-2760
Management Data 5340-01-498-2760
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5340-01-498-2760
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601
Freight Information 5340-01-498-2760
5340-01-498-2760 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095760. A Sub NMFC of X. It has a NMFC Description of LOCKS/LOCK SETS NOI METAL IN BBL/BX. 5340-01-498-2760 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50130 which rates the freight between FCL and LCL. 5340-01-498-2760 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-498-2760 is not classified as a special type of cargo when transported by water. 5340-01-498-2760 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-498-2760
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 5
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-01-498-2760 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: