5360-14-040-1622
Compression Helical Spring
5360140401622 140401622 708924
An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. View more Compression Helical Spring
Managed by France
NSN Created on 1 Jan 1972
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5360-14-040-1622
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5360-14-040-1622 4+ Documents (More...)
5310-14-537-7029 5310145377029 145377029 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
CAGE 5FDM1 Action Turbine Repair Services in Summit Argo, IL United States
CAGE 3DJA2 Scaletta Technologies Inc. in Bedford Park, IL United States
5310-17-125-0842 5310171250842 171250842 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 5360-14-040-1622
Approved Sources 5360-14-040-1622
- Part Number
- Manufacturer
- Status
- 708924
- Manufacturer
- F6103 - Lucas France Sa Div Aerospace France (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
NATO Stock Numbers Related to 5360-14-040-1622
5360-99-891-0856 5360-27-034-9003 5360-22-127-1332 5360-12-333-3088 5360-99-463-1580 5360-14-531-8911 5360-14-316-7017 5360-27-019-2863 5360-14-293-6568 5360-14-232-9640 5360-99-967-4569 5360-99-542-3068 5360-99-763-1412 5360-12-335-5536 5360-14-562-4876 5360-15-150-4028 5360-99-600-8244 5360-66-140-5091