5365-00-032-3799

4730-00-270-4027 4730002704027 002704027

5310-14-270-4027 5310142704027 142704027 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5865-01-270-4027 5865012704027 012704027 is a collection of items, which when used with an electronic set provide facilities for a complete oscillator (1), crystal controlled or oscillator (1) non-crystal controlled.

6685-22-270-4027 6685222704027 222704027