Premium Information is available for this item - Upgrade for $1 a day
5365-00-413-6168
Shim
5365004136168 004136168 K21805 019255 F5416 9353535 31D15 833701 Z996A 96111000112
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
26
Marketplace 5365-00-413-6168
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-413-6168 5+ Documents (More...)
What is CAGE Code F5416?
F5416 refers to Cees (Cie Europeenne D'emballages Speciaux) Industrie located at 82 Rue Auguste Badin
NumberManufacturerStatusMLC-0139 Z4732 - Haulmark Trailers (Australia) Pty (Active) Primary Buy RNCC 3 RNVC 2 DAC 6 K21805
Restrictions 5365-00-413-6168
5365-00-413-6168 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-00-413-6168
- US Army (A919)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZ
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTHD
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1998
Approved Sources 5365-00-413-6168
- Part Number
- Manufacturer
- Status
- K21805
- Manufacturer
- 60038 - The Timken Corporation (Active)
- Primary Buy
- Primary Buy
- 019255
- 61790 - Astec Industries Inc (Active)
- Primary Buy
- Primary Buy
- F5416
- 21416 - Harsco Corp (Active)
- Original Design
- Original Design
- 9353535
- 97907 - Terex Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 31D15
- 61790 - Astec Industries Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 833701
- 61465 - Garwood/Feller Inc Garwood Winch Div (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- Z996A
- 10695 - Taylor-Dunn Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 96111000112
- 61748 - Clyde Union Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 31D15
- 05643 - Barber-Greene Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-00-413-6168
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Construction [CQCF]
- One-Piece
- Bolt Hole Quantity [AECS]
- 4
- Style Designator [STYL]
- Rectangular
- Hole Diameter [AAUB]
- 0.531 Inches Nominal
- Bolt Circle Diameter [ABKG]
- 5.500 Inches Nominal
- Overall Width [ABMK]
- 6.500 Inches Nominal
- Aperture Diameter [ABVL]
- 4.531 Inches Nominal
- Outside Corner Radius [ADPW]
- 0.500 Inches Nominal
- Outside Corner Inverted Radius [ADUU]
- 0.250 Inches Nominal
- Side Radius From Gasket Center [ADVC]
- 2.750 Inches Nominal
Weapon Systems (WSDC) 5365-00-413-6168
DLA Procurement Analysis 5365-00-413-6168
- Last Stock Position:
- 56 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-00-413-6168
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5365-00-413-6168
Freight Information 5365-00-413-6168
5365-00-413-6168 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-00-413-6168 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-00-413-6168 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-00-413-6168 is not classified as a special type of cargo when transported by water. 5365-00-413-6168 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-413-6168
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 5365-00-413-6168 1 Records
Contracting Technical Data File (CTDF) 5365-00-413-6168 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: