Premium Information is available for this item - Upgrade for $1 a day
5365-00-452-0228
Shim
5365004520228 004520228 428104
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
4
Marketplace 5365-00-452-0228
Request a Quotation from participating marketplace vendors
Related Documents 5365-00-452-0228 5+ Documents (More...)
-00001 VH00-428104-00001 A framework which is placed inside an oven to hold pans or trays of food.
www.nsnlookup.com /nato/nato-stock-numbers/inc Oven Rack (INC 40086) Sep 2022 7310-01-705-4684 Oven Rack VH00-428104
JavaScript in your web browser . 5306-99-561-6653Tee Head Bolt5306995616653 995616653 Y7580178X J320-428104
NumberManufacturerStatusY7580178X K7078 - Wilson Henry & Co (Southampton) Ltd (Replaced) Primary Buy RNCC 3 RNVC 2 DAC 2 J320-428104
-00004 VH00-428104-00004 A framework which is placed inside an oven to hold pans or trays of food.
www.nsnlookup.com /cage Vulcan-Hart Corp (CAGE Code 89565) 8 Nov 2022 7310-01-705-4660 Oven Rack 00-428104
Restrictions 5365-00-452-0228
5365-00-452-0228 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5365-00-452-0228
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-00-452-0228
- US Marine Corps (MC41)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- MC04
- Spain (YB01)
- Effective Date:
- 1 Dec 1996
Approved Sources 5365-00-452-0228
- Part Number
- Manufacturer
- Status
- 428104
- Manufacturer
- 00447 - Wabco Construction And Mining (Obsolete)
- Original Design
- Original Design
Datasheet 5365-00-452-0228
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Bolt Circle Diameter [ABKG]
- 3.875 Inches Nominal
- Bolt Hole Quantity [AECS]
- 5
- Construction [CQCF]
- Laminated
- Features Provided [CBBL]
- Nonseparable
- Hole Diameter [AAUB]
- 0.406 Inches Nominal
- Material [MATT]
- Copper Alloy
- Outside Diameter [ABKV]
- 4.625 Inches Nominal
- Lamination Quantity [BRDX]
- 6 And 1
DLA Procurement Analysis 5365-00-452-0228
Management Data 5365-00-452-0228
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5365-00-452-0228
Freight Information 5365-00-452-0228
5365-00-452-0228 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 5365-00-452-0228 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 5365-00-452-0228 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 586 for ocean manifesting and military sealift. 5365-00-452-0228 is not classified as a special type of cargo when transported by water. 5365-00-452-0228 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-00-452-0228
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5365-00-452-0228 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: