5815-00-007-7711

5310-14-484-1848 5310144841848 144841848 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1560-01-706-5322 1560017065322 017065322 is a preformed metallic or nonmetallic sheet of various shapes and contours which is used as a segment of the covering of an airframe. it may be predrilled to facilitate mounting. excludes cloth, airplane

1560-01-706-6777 1560017066777 017066777 is a preformed metallic or nonmetallic sheet of various shapes and contours which is used as a segment of the covering of an airframe. it may be predrilled to facilitate mounting. excludes cloth, airplane

1560-01-706-6664 1560017066664 017066664 is a preformed metallic or nonmetallic sheet of various shapes and contours which is used as a segment of the covering of an airframe. it may be predrilled to facilitate mounting. excludes cloth, airplane

1560-01-706-7511 1560017067511 017067511 is a preformed metallic or nonmetallic sheet of various shapes and contours which is used as a segment of the covering of an airframe. it may be predrilled to facilitate mounting. excludes cloth, airplane