5815-14-234-2878

5340-00-916-4250 5340009164250 009164250 is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. includes straight flexible items. for items specifically designed to clamp a hose to a connection to prevent leakage, see clamp, hose. see also hanger, pipe and clip, spring tension. for retaining straps with a bridge, see strap, retaining. excludes clamp, electrical; band, retaining; clamp (1), c; bracket pipe.

5306-00-884-8745 5306008848745 008848745 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.

5320-01-322-7355 5320013227355 013227355 is a metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.

5970-14-454-6659 5970144546659 144546659 is an insulator that is essentially thin, flat, and round in shape, with or without holes. the general shape may vary by the addition of such features as beveled edges, indented surfaces, through-hole key and/or peripheral flats. it may have one or more holes off center; if there are two or more holes, one may be centrally located. excludes mounting pad, electrical-electronic component.

for $1 a day Upgrade your Account Upgrade 4920-00-001-3913Collimator Bubble4920000013913 000013913 16-38
). (7) If erection cylinder drifts but does not leak, replace erection cylinder (para 16-38). (8)
-1 MTV Direct Maintenance Manual M1083 Series - Volume 1 Page 1199 Replace erection cylinder (para 16-38