5850-01-048-7072

5365-01-448-0848 5365014480848 014480848 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

5905-01-158-2299 5905011582299 011582299 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self supporting. opposition to the flow of current is an inherent property of the resistance wire and is manifest by the heat dissipation in the resistor. excludes suppressor, ignition interference.

3110-01-453-3285 3110014533285 014533285 is two single row annular ball bearings selected dimensionally to be a matched pair or set. the ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. may include a single row angular contact bearing with faces specially ground for duplex mounting.

5930-01-421-3329 5930014213329 014213329 is a switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. the action may be momentary, with mechanical return. the actuating device may or may not be an integral part of the switch. the item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. excludes light-switch; light-switch assembly; switch, beam selecting, headlight; switch, foot; switch, interlock; switch, pressure; switch, push-pull; switch, sensitive and switch assembly. for devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter, motor and controller, motor.

ADZC]High TemperatureMaterial Document And Classification [MDCL]Mil-Std-417, Type R, Class Rs, Grade Rs710