Premium Information is available for this item - Upgrade for $1 a day
5905-00-984-2856
Inductive Wire Wound Fixed Resistor
5905009842856 009842856 MIL-PRF-18546/2 RH100 RH-100-2.0-0HMS RE77G2R00 MIL-R-18546/2
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE. View more Inductive Wire Wound Fixed Resistor
November 2023
12
Marketplace 5905-00-984-2856
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5905-00-984-2856 5+ Documents (More...)
A resistor whose ohmic value cannot 744221-19 RH-100-100W 6 0H RH100 Fixed Resistor RE80G5R90 MIL-R
-18546/2 value cannot be adjusted or varied. 744221-19 RH-100-100W 6 0H RH100 250N20OHM3% RE80N20R0 MIL-R
RH100 HOOK,HOIST 8 EA NS Request Quotation RH-100 HOOK,HOIST 1 EA NS Request Quotation Subscribe to View
RH100 HOOK,HOIST 1 EA NS Request Quotation RH-100 HOOK,HOIST 2 EA NS Request Quotation Subscribe to View
RH100 WICK,DRUM 6 BX NS Request Quotation RH-100 WICK,DRUM 5 BX NS Request Quotation Subscribe to View
RH-100 WICK,DRUM 1 BX NS Request Quotation RH100 WICK,DRUM 8 BX NS Request Quotation Subscribe to View
/fsg-65/fsc-6515/us
RH100 SPECULUM,NASAL 6 EA NS Request Quotation RH-100 SPECULUM,NASAL 5 EA NS Request Quotation Subscribe
RH-100 SPECULUM,NASAL 1 EA NS Request Quotation RH100 SPECULUM,NASAL 8 EA NS Request Quotation Subscribe
RE80GR750 MIL-R-18546/2 value cannot be adjusted or varied. 744221-19 RH-100-100W 6 0H RH100-
744221-19 RH-100-100W 6 0H RH100-6R00F RE77G6R04 RE77G6R00 MIL-R-18546/2 6982Inductive Wire Wound
Restrictions 5905-00-984-2856
5905-00-984-2856 is a Inductive Wire Wound Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5905-00-984-2856
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-984-2856
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Supplementary Collaborators:
- GTKE
Approved Sources 5905-00-984-2856
- Part Number
- Manufacturer
- Status
- RE77G2R00
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-18546/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-18546/2
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- RH100
- 23616 - Epco Products Co (Active)
- Advisory Reference
- Advisory Reference
- RH-100-2.0-0HMS
- 91673 - Epiphone Inc (Obsolete)
- Advisory Reference
- Advisory Reference
Datasheet 5905-00-984-2856
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 25.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 275.0
- Body Height [ADAU]
- 1.750 Inches Nominal
- Body Length [ADAQ]
- 3.500 Inches Nominal
- Body Width [ADAT]
- 1.812 Inches Nominal
- Distance Between Centerlines Of Mounting Facilities Parallel To Body Length [AEBY]
- 2.750 Inches Nominal
- Electrical Resistance [AAPP]
- 2.000 Ohms
- Mounting Hole Size [BYML]
- 0.188 Inches Nominal
- Inclosure Method [AAQZ]
- Encased
- Power Dissipation Rating In Watts [AEFB]
- 30.000 Free Air
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance In Percent [AAPQ]
- -1.000/+1.000
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-18546/2 Government Specification
- Style Designator [STYL]
- Axial Terminal (S)
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+275.0
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -50.0/+50.0
- Terminal Length [ABJT]
- 0.989 Inches Nominal
- Terminal Type [AARB]
- Threaded Stud
- Test Data Document [TEST]
- 81349-Mil-R-18546 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-00-984-2856
DLA Procurement Analysis 5905-00-984-2856
- Last Stock Position:
- 34 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5905-00-984-2856
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5905-00-984-2856
Freight Information 5905-00-984-2856
5905-00-984-2856 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-984-2856 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 5905-00-984-2856 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-984-2856 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-984-2856 is not classified as a special type of cargo when transported by water. 5905-00-984-2856 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-984-2856
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- A-A-1898, Grade II, Water Resistant Cellulosic Cushioning
- --
- PPP-B-566 or PPP-B-676, Folding or Setup Box
- No special marking
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 5905-00-984-2856 3 Records
Contracting Technical Data File (CTDF) 5905-00-984-2856 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: