Premium Information is available for this item - Upgrade for $1 a day
5930-00-669-7344
Sensitive Switch
5930006697344 006697344 MIL-PRF-8805/50 H1-8 MS25040-3 MIL-S-8805/50
A switch with a quick-acting mechanism actuated by a highly delicate tactile contact. Includes membrane switch. Excludes SWITCH, FLEXIBLE; SWITCH, PRESSURE; and SWITCH, THERMOSTATIC. View more Sensitive Switch
Managed by United States
NSN Created on 1 Jan 1963
Data Last Changed
November 2023
November 2023
NATO Update Count
11
11
NATO Data Quality
Marketplace 5930-00-669-7344
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5930-00-669-7344 5+ Documents (More...)
MS-25040-3 SWITCH,SENSITIVE 13 EA NS Request Quotation H1-8 SWITCH,SENSITIVE 18 EA NS Request Quotation
MIL-S-8805/50 SWITCH,SENSITIVE 41 EA NS Request Quotation Subscribe to View Vendor Details...
H1-8 SWITCH,SENSITIVE 23 EA NS Request Quotation MS25040-3 SWITCH,SENSITIVE 22 EA NS Request Quotation
MIL-S-8805/50 SWITCH,SENSITIVE 41 EA NS Request Quotation Subscribe to View Vendor Details...
H1-8 SWITCH,SENSITIVE 23 EA NS Request Quotation MS25040-3 SWITCH,SENSITIVE 22 EA NS Request Quotation
4820-12-179-5600 4820121795600 121795600 is a valve permitting flow in one direction only. it does not have a stem, except when equipped with a lever and weight and has no pressure adjustment. it may be inline or cartridge (manifold) design.
5365-66-093-0917 5365660930917 660930917 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.
2815-12-137-0256 2815121370256 121370256 SCHLAUCHLEITUNG
3439-01-150-2304 3439011502304 011502304 is a coated or uncoated filler metal or an uncoated nonfiller material in wire or solid rod form. it is used in welding where the fusing or melting heat is supplied through the medium of an electric arc wherein the rod serves as carrier of the electric current. for a collection of welding electrodes, see welding electrode set. excludes electrode, cutting, solid.
Restrictions 5930-00-669-7344
5930-00-669-7344 is a Sensitive Switch that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
Import and Export 5930-00-669-7344
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5930-00-669-7344
- US Army (A918)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- A196
- Supplementary Receivers:
- BD
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKEHD
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5930-00-669-7344
- Part Number
- Manufacturer
- Status
- MS25040-3
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-8805/50
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-S-8805/50
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- H1-8
- 81640 - Safran Power Usa, Llc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5930-00-669-7344
- Characteristic
- Specifications
- FIIG
- Specifications
- A053A0
- Actuator Style [AFUQ]
- Roller Arm
- Body Style [AAQL]
- Hole Mounted
- Center To Center Distance Between Housing Mounting Facilities Parallel To Height [AFWG]
- 1.548 Inches Minimum And 1.578 Inches Maximum
- Center To Center Distance Between Housing Mounting Facilities Parallel To Length [AFWH]
- 1.860 Inches Minimum And 1.890 Inches Maximum
- Contact Load Current Rating At Maximum Rated Voltage [CXQR]
- 15.000 Amperes Resistive Dc And 10.000 Amperes Inductive Dc And 5.000 Amperes Lamp Dc And 10.000 Amperes Resistive Ac And 10.000 Amperes Inductive Ac And 6.000 Amperes Lamp Ac
- Features Provided [CBBL]
- Actuator Seal
- Hazardous Locations/Environmental Protection [ABFE]
- Watertight
- Housing Height [AFWC]
- 1.235 Inches Minimum And 1.265 Inches Maximum
- Housing Length [AFWD]
- 2.485 Inches Minimum And 2.515 Inches Maximum
- Housing Width [AFWE]
- 1.204 Inches Minimum And 1.234 Inches Maximum
- Maximum Voltage Rating In Volts [AFXE]
- 115.0 Ac And 28.0 Dc
- Mounting Method [AXGY]
- Unthreaded Hole
- Nonpile-Up Contact Arrangement [CRLD]
- 2 Two Circuit, Double Make, Two Positions Momentary Single Switch Unit
- Inclosure Type [AKNA]
- Fully Inclosed
- Overall Length [ABHP]
- 3.187 Inches Nominal
- Switch Actuating Force [CSJN]
- 64.0 Ounces Minimum And 66.0 Ounces Maximum
- Terminal Type And Quantity [TTQY]
- 8 Connector, Receptacle
- Test Data Document [TEST]
- 81349-Mil-S-8805 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5930-00-669-7344
Management Data 5930-00-669-7344
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5930-00-669-7344
5930-99-915-0453 5930-22-612-8942 5930-27-041-9585 5930-99-302-8128 5930-99-474-5977 5930-12-368-1529 5930-99-020-6409 5930-12-344-3684 5930-99-797-0902 5930-99-151-5216 5930-99-718-9561 5930-99-768-5251 5930-12-337-2193 5930-99-742-8804 5930-99-971-6837 5930-99-723-6217 5930-12-327-5823 5930-99-435-6203
Freight Information 5930-00-669-7344
5930-00-669-7344 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061300. A Sub NMFC of X. It has a NMFC Description of CIRCUIT BREAKER/SWITCH NOI. 5930-00-669-7344 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34410 which rates the freight between FCL and LCL. 5930-00-669-7344 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5930-00-669-7344 is not classified as a special type of cargo when transported by water. 5930-00-669-7344 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5930-00-669-7344
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- No Requirement
- Not Applicable
- PPP-B-566 or PPP-B-676, Folding or Setup Box
- No special marking
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5930-00-669-7344 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: