Premium Information is available for this item - Upgrade for $1 a day
5935-00-403-5232
Electrical Receptacle Connector
5935004035232 004035232 147-140 RFA0750 KA71-03 6034
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Receptacle Connector
May 2023
16
Marketplace 5935-00-403-5232
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5935-00-403-5232 5+ Documents (More...)
(Active) Primary Buy RNCC 3 RNVC 2 DAC 3 TS 86/147-140 H2336 - Koninklyke Landmacht (Active) Incomplete
Restrictions 5935-00-403-5232
5935-00-403-5232 is a Electrical Receptacle Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains Silver.
Import and Export 5935-00-403-5232
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-00-403-5232
- US Air Force (FGGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FGTX
- US Marine Corps (MC49)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Supplementary Collaborators:
- HD
Approved Sources 5935-00-403-5232
- Part Number
- Manufacturer
- Status
- 6034
- Manufacturer
- 08718 - Itt Cannon Electric Phoenix Div (Replaced)
- Original Design
- Original Design
- 147-140
- 0PN68 - Ampex Data Systems Corporation (Active)
- Advisory Reference
- Advisory Reference
- 147-140
- 95036 - Applied Devices Corp (Obsolete)
- Advisory Reference
- Advisory Reference
- RFA0750
- 94375 - Lax Electronics, Inc. (Active)
- Advisory Reference
- Advisory Reference
- KA71-03
- 11636 - King Electronics Inc (Obsolete)
- Transferred
- Transferred
Datasheet 5935-00-403-5232
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Bushing Accommodation Hole Shape [CXCJ]
- Round
- Connector Locking Method [AFRV]
- Externally Threaded Shell
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Maximum Ac Voltage Rating In Volts [AFRD]
- 500.0 Single Mating End Single Contact Grouping
- Contact Material Document And Classification [CSGF]
- Qq-C-530,Comp Ht Fed Spec Single Material Response Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- Bnc Single Mating End
- Contact Removability [AFQZ]
- Nonremovable Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Silver Single Mating End Single Contact Grouping
- Environmental Protection [ADZC]
- Watertight
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 0.438 Inches And 0.438 Inches
- Included Contact Type [CXCL]
- Coaxial Socket Single Mating End Single Contact Grouping
- Included Contact Quantity [CXCG]
- 1 Single Mating End Single Contact Grouping
- Insert Material [CQZG]
- Plastic Tetrafluoroethylene Single Mating End
- Precious Material And Location [PMLC]
- Contact Silver
- Precious Material [PRMT]
- Silver
- Radio Frequency Type Contact Characteristic Impedance In Ohms [AFRY]
- 50.0 Single Mating End Single Contact Grouping
- Shell Material [CSPT]
- Copper Alloy
- Shell Surface Treatment [CSWM]
- Silver
- Shell Type [AFRT]
- Solid
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Solder Well Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-39012 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A And 2A
- Thread Series Designator [THSD]
- Unef And Unef
- Threaded Device Type [AFQR]
- Coupling Facility And Mounting Bushing
DLA Procurement Analysis 5935-00-403-5232
Management Data 5935-00-403-5232
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- CX
- AIRBORNE COMMUNICATIONS AND NAVIGATION EQUIPMENT
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5935-00-403-5232
Freight Information 5935-00-403-5232
5935-00-403-5232 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-00-403-5232 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-00-403-5232 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-00-403-5232 is not classified as a special type of cargo when transported by water. 5935-00-403-5232 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-00-403-5232
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5935-00-403-5232 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: