Premium Information is available for this item - Upgrade for $1 a day
5935-01-122-7232
Electrical Plug Connector
5935011227232 011227232 SAE-AS81511/26 M81511/26EG02S2 MIL-C-81511/26
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR. View more Electrical Plug Connector
November 2023
3
Marketplace 5935-01-122-7232
Request a Quotation from participating marketplace vendors
Related Documents 5935-01-122-7232 5+ Documents (More...)
An electrical fitting with electrical contacts, constructed to be M81511/26EH01S5 MIL-C-81511/26
M81511/26EH01S5 MIL-C-81511/26 An electrical fitting with electrical contacts, constructed to be
An electrical fitting with electrical contacts, constructed to be M81511/26EH01S5 MIL-C-81511/26
M81511/26EH01S5 MIL-C-81511/26 An electrical fitting with electrical contacts, constructed to be
An electrical fitting with electrical contacts, constructed to be M81511/26EH01S5 MIL-C-81511/26
M81511/26EH01S5 MIL-C-81511/26 An electrical fitting with electrical contacts, constructed to be
An electrical fitting with electrical contacts, constructed to be M81511/26EH01S5 MIL-C-81511/26
M81511/26EH01S5 MIL-C-81511/26 An electrical fitting with electrical contacts, constructed to be
An electrical fitting with electrical contacts, constructed to be M81511/26EH01S5 MIL-C-81511/26
M81511/26EH01S5 MIL-C-81511/26 An electrical fitting with electrical contacts, constructed to be
Restrictions 5935-01-122-7232
5935-01-122-7232 is a Electrical Plug Connector that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item contains gold.
Import and Export 5935-01-122-7232
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5935-01-122-7232
- US Air Force (FXGX)
- Effective Date:
- 1 Nov 2005
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Nov 2005
- Supplementary Collaborators:
- GTJBHD
Approved Sources 5935-01-122-7232
- Part Number
- Manufacturer
- Status
- SAE-AS81511/26
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- M81511/26EG02S2
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- MIL-C-81511/26
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- M81511/26EG02S2
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5935-01-122-7232
- Characteristic
- Specifications
- FIIG
- Specifications
- A039B0
- Connector Locking Method [AFRV]
- Bayonet Latch
- Contact Material [CQTZ]
- Copper Alloy Single Mating End Single Contact Grouping
- Contact Position Arrangement Style [AFQX]
- 20-45 Single Mating End
- Contact Removability [AFQZ]
- Removable Single Mating End Single Contact Grouping
- Contact Surface Treatment Document And Classification [CRBJ]
- Mil-G-45204,Type 1,Class 2 Mil Spec Single Treatment Response Single Mating End Single Contact Grouping
- Contact Surface Treatment [CQYH]
- Gold Single Mating End Single Contact Grouping
- Environmental Protection [ADZC]
- Moisture Proof And Salt Water Resistant And Shock Proof And Vibration Proof
- Body Style [AAQL]
- Straight Shape, Internal Coupling
- Mating End Quantity [AFQW]
- 1
- Nominal Thread Size [CQJX]
- 1.250 Inches
- Included Contact Type [CXCL]
- Round Socket Single Mating End Single Contact Grouping
- Included Contact Quantity [CXCG]
- 45 Single Mating End Single Contact Grouping
- Insert Position In Deg [AFRP]
- 135.0 And 170.0 And 200.0 And 310.0
- Polarization Method [AFRN]
- Keyway Or Multiple Keyway
- Precious Material And Location [PMLC]
- Contact Surfaces Gold
- Precious Material [PRMT]
- Gold
- Precious Material And Weight [PMWT]
- 0.045 Gold Grains, Troy
- Shell Material [CSPT]
- Aluminum
- Shell Surface Treatment Document And Classification [CTBC]
- Qq-P-416,Type 2,Class 3 Fed Spec Single Treatment Response
- Shell Surface Treatment [CSWM]
- Cadmium
- Shell Type [AFRT]
- Solid
- Overall Diameter [ADAV]
- 1.604 Inches Minimum And 1.624 Inches Maximum
- Overall Length [ABHP]
- 1.460 Inches Minimum And 1.525 Inches Maximum
- Threaded Device Type [AFQR]
- Back Shell
- Specification/Standard Data [ZZZK]
- 81349-Mil-C-81511/26 Government Specification
- Terminal Location [CQTM]
- Back Single Mating End Single Contact Grouping
- Terminal Type [CSCF]
- Crimp Single Mating End Single Contact Grouping
- Test Data Document [TEST]
- 81349-Mil-C-81511 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Un
- Thread Quantity Per Inch [CMLP]
- 28
Weapon Systems (WSDC) 5935-01-122-7232
DLA Procurement Analysis 5935-01-122-7232
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5935-01-122-7232
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5935-01-122-7232
Freight Information 5935-01-122-7232
5935-01-122-7232 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 061680. A Sub NMFC of Z. It has a NMFC Description of ELEC WIRING PLUGS ETC. 5935-01-122-7232 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34570 which rates the freight between FCL and LCL. 5935-01-122-7232 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5935-01-122-7232 is not classified as a special type of cargo when transported by water. 5935-01-122-7232 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5935-01-122-7232
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5935-01-122-7232 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: