5950-21-819-1232

8040-01-304-1481 8040013041481 013041481 is a substance compounded for binding materials together by surface attachment. it is not used primarily to fill voids or pores or for sealing purposes. excludes canada balsam; cement, watch jewel; film cement, photographic; gasket cement; and gasket shellac compound.

4730-00-614-5872 4730006145872 006145872 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. one connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, the other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. it may have side or heel inlet(s). see also elbow, hose; connector, multiple, fluid pressure line; and elbow, swivel flange to hose.

4730-14-281-5571 4730142815571 142815571 is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. it may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. it may include nuts, sleeves, and/or grommets.

4730-12-346-7002 4730123467002 123467002 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.

5305-01-046-3966 5305010463966 010463966 is an externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. no. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. a locking feature may be incorporated in the design of the head or threads. for items which are both shouldered and have an externally relieved body, use screw, externally relieved body. for items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. excludes bolt, internal wrenching and screw, cap, socket head.