Premium Information is available for this item - Upgrade for $1 a day
5955-00-345-7805
Quartz Crystal Unit
5955003457805 003457805 579R696H01
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL. View more Quartz Crystal Unit
May 2023
10
Marketplace 5955-00-345-7805
Request a Quotation from participating marketplace vendors
Related Documents 5955-00-345-7805 1+ Documents (More...)
Restrictions 5955-00-345-7805
5955-00-345-7805 is a Quartz Crystal Unit that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5955-00-345-7805
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5955-00-345-7805
- US Air Force (FGGX)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FGTX
- US Navy (N9BN)
- Effective Date:
- 1 Jul 2005
- Supplementary Collaborators:
- KE
Approved Sources 5955-00-345-7805
- Part Number
- Manufacturer
- Status
- 579R696H01
- Manufacturer
- 97942 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 579R696H01
- 00136 - Microsemi Corp. - High Performance (Active)
- Secondary Buy
- Secondary Buy
- 579R696H01
- 74306 - Piezo Crystal Co (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5955-00-345-7805
- Characteristic
- Specifications
- FIIG
- Specifications
- A059A0
- Drive Level Rating [CQYL]
- 3.0 Milliwatts Minimum And 7.0 Milliwatts Maximum
- Body Width [ADAT]
- 0.394 Inches Minimum And 0.401 Inches Maximum
- Body Thickness [ADPR]
- 0.142 Inches Minimum And 0.149 Inches Maximum
- Center To Center Distance Between Terminals [CQBK]
- 0.194 Nominal Mils And 0.200 Nominal Centimeters
- Circuit Resonance [AEHD]
- Series Resonance
- Frequency Tolerance For Operating Temp In Percent [CRFX]
- -0.005/+0.005
- Holder Cover Material [AEHS]
- Metal
- Operating Temp Range [AFGA]
- -20.0/+80.0 Deg Celsius
- Mode Of Oscillation [AEHC]
- Fundamental
- Overall Length [ABHP]
- 0.500 Inches Minimum And 0.525 Inches Maximum
- Overall Thickness [ADUM]
- 0.156 Inches Minimum And 0.176 Inches Maximum
- Overall Width [ABMK]
- 0.408 Inches Minimum And 0.428 Inches Maximum
- Specified Frequency [AEHG]
- 29.985 Megahertz
- Style Designator [STYL]
- Oval Body, Wire Leads
- Terminal Diameter [AEBT]
- 0.016 Inches Minimum And 0.019 Inches Maximum
- Terminal Length [ABJT]
- 1.500 Inches Nominal
DLA Procurement Analysis 5955-00-345-7805
Management Data 5955-00-345-7805
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Dec 2005
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Fund:
- LP
- Items initially authorized for local purchase
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5955-00-345-7805
Freight Information 5955-00-345-7805
5955-00-345-7805 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 063025. A Sub NMFC of Z. It has a NMFC Description of SEMICONDUCTORS/DEVICES NOI ETC. 5955-00-345-7805 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34525 which rates the freight between FCL and LCL. 5955-00-345-7805 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5955-00-345-7805 is not classified as a special type of cargo when transported by water. 5955-00-345-7805 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5955-00-345-7805
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5955-00-345-7805 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: