Premium Information is available for this item - Upgrade for $1 a day
5975-00-548-7818
Electrical Conduit Sealing Fitting
5975005487818 005487818 ESUM50 VA12 EZS16
An item of metallic composition with a chamber for sealing compound and two hubs to accommodate electrical conduits of specified sizes. This item is designed with a filler hole and a removable screw plug to enable the pouring of sealing compound into the chamber for the purpose of preventing the passage of explosive gases through a conduit run. The item is primarily designed for use in hazardous locations and may be designed for vertical use, horizontal use, or both. For items which permit the connection or termination of wires, see POTHEAD. See also COUPLING, ELECTRICAL CONDUIT. View more Electrical Conduit Sealing Fitting
November 2023
6
Marketplace 5975-00-548-7818
Request a Quotation from participating marketplace vendors
Related Documents 5975-00-548-7818 5+ Documents (More...)
Electrical Conduit Sealing Fitting 005487818 AssyUOMTechnical DocumentQuantative ExpressionUS Marine
Navy (DN)NZDiscontinued-Use 5975-00-548-7818Defense Logistics Agency (DS)IZDiscontinued-Use 5975-00-548-7818
5975/us 5975-01-393-6205 Electrical Conduit Sealing Fitting 013936205 440-0685 5975-14-385-3824 5975-00-548-7818
5975/us 5975-00-110-8250 Electrical Conduit Sealing Fitting 001108250 440-0685 5975-14-385-3824 5975-00-548-7818
6205 Electrical Conduit Sealing Fitting 013936205 329-8109 5975-14-440-0685 5975-14-385-3824 5975-00-548-7818
3850 Electrical Conduit Sealing Fitting 013793850 329-8109 5975-14-440-0685 5975-14-385-3824 5975-00-548-7818
5975-01-677-6177 5975-01-288-6592 Conduit Sealing Fitting 013936205 440-0685 5975-14-385-3824 5975-00-548-7818
5975-01-677-6177 5975-01-288-6592 Conduit Sealing Fitting 001108250 440-0685 5975-14-385-3824 5975-00-548-7818
Fitting 013936205 360-5067 5975-01-526-0783 5975-01-329-8109 5975-14-440-0685 5975-14-385-3824 5975-00-548-7818
Fitting 001108250 360-5067 5975-01-526-0783 5975-01-329-8109 5975-14-440-0685 5975-14-385-3824 5975-00-548-7818
Restrictions 5975-00-548-7818
5975-00-548-7818 is a Electrical Conduit Sealing Fitting that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5975-00-548-7818
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5975-00-548-7818
- US Army (A918)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- A178
- Supplementary Receivers:
- AZCE
- US Air Force (FXGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FXCX
- NASA (G170)
- Effective Date:
- 1 Apr 1991
- NASA (G860)
- Effective Date:
- 1 Apr 1991
- US Marine Corps (MC41)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- MC04
- US Navy (N9BG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- NIGD
- Supplementary Collaborators:
- GTKEJNHD
- Poland (WP01)
- Effective Date:
- 1 Oct 2006
- Australia (ZA01)
- Effective Date:
- 1 Aug 2009
Approved Sources 5975-00-548-7818
- Part Number
- Manufacturer
- Status
- ESUM50
- Manufacturer
- 03743 - Egs Electrical Group (Active)
- Primary Buy
- Primary Buy
- VA12
- 49367 - Amphenol Corporation (Active)
- Primary Buy
- Primary Buy
- EZS16
- 15235 - Crouse-Hinds Co (Obsolete)
- Primary Buy
- Primary Buy
Datasheet 5975-00-548-7818
- Characteristic
- Specifications
- FIIG
- Specifications
- A01800
- Conduit Type Accommodated [AELS]
- Rigid Metallic Thickwall Second End
- Conduit Type Accommodated [AELS]
- Rigid Metallic Thickwall First End
- Furnished Items [ABFF]
- Close Nipple
- End Type [APTD]
- External Thread First End
- End Type [APTD]
- Internal Thread Second End
- Filler Head Opening Type [ABFC]
- Adjustable Cover
- Hazardous Locations/Environmental Protection [ABFE]
- Explosion Proof Nec Cl.I, Gp.Cd;Cl.Ii, Gp.Efg
- Material [MATT]
- Iron Malleable
- Item Accommodated Trade Size [CQYR]
- 0.500 Inches First End
- Item Accommodated Trade Size [CQYR]
- 0.500 Inches Second End
- Overall Length [ABHP]
- 4.187 Inches Nominal
- Overall Width [ABMK]
- 3.625 Inches Nominal
- Special Features [FEAT]
- Close Nipple May Be Used Interchangeably In Either Top Or Bottom Hub
- Style Designator [STYL]
- Standard
- Surface Treatment [SFTT]
- Cadmium Or Zinc
Weapon Systems (WSDC) 5975-00-548-7818
DLA Procurement Analysis 5975-00-548-7818
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5975-00-548-7818
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Dec 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- US Marine Corps (DM)
- M
- 0
- Reversal Of Phrase Code Z 5975-00-685-9519
- 0
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 7
- Reviewed and determined non-essential
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5975-00-548-7818
Freight Information 5975-00-548-7818
5975-00-548-7818 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 172640. A Sub NMFC of Z. It has a NMFC Description of SEALS, SECURITY. 5975-00-548-7818 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 84710 which rates the freight between FCL and LCL. 5975-00-548-7818 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5975-00-548-7818 is not classified as a special type of cargo when transported by water. 5975-00-548-7818 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5975-00-548-7818
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 4.1" H x 3.6" W x -- L
- --
- --
- Physical Protection
- Any Suitable Process
- 4.1" H x 3.6" W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5975-00-548-7818 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: