Premium Information is available for this item - Upgrade for $1 a day
5977-00-028-4160
Electrical Contact Brush
5977000284160 000284160 TF-28440-1
An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: CONTACT, ELECTRICAL; and CONTACT ASSEMBLY, ELECTRICAL. View more Electrical Contact Brush
May 2023
22
Marketplace 5977-00-028-4160
Request a Quotation from participating marketplace vendors
Related Documents 5977-00-028-4160 2+ Documents (More...)
Restrictions 5977-00-028-4160
5977-00-028-4160 is a Electrical Contact Brush that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5977-00-028-4160
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5977-00-028-4160
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Philippines (ZM01)
- Effective Date:
- 1 Feb 2015
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Dec 1995
Approved Sources 5977-00-028-4160
- Part Number
- Manufacturer
- Status
- TF-28440-1
- Manufacturer
- 59875 - Eaton Corp (Active)
- Primary Buy
- Primary Buy
- TF-28440-1
- 68037 - Argo-Tech Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5977-00-028-4160
- Characteristic
- Specifications
- FIIG
- Specifications
- A01500
- Bevel Depth [AJEF]
- 0.125 Inches Nominal
- Bevel Length [BMYK]
- 0.125 Inches Nominal
- Body Style [AAQL]
- Rectangular Commutator
- Brush Shunt Length [AHXP]
- 1.438 Inches Nominal All Shunts
- Contact Face Style [CQGT]
- Concave
- Material Document And Classification [MDCL]
- Stackpole Carbon Co Grade Wab Mfr Ref Single Material Response
- Material [MATT]
- Electrographitic
- Length [ABRY]
- 0.750 Inches Nominal
- Radius [ABGG]
- 0.781 Inches Nominal
- Shunt Insulation Provision And Quantity [CRBG]
- 2 Uninsulated
- Shunt Position Designator [AABU]
- 8
- Width [ABGL]
- 0.621 Inches Minimum And 0.625 Inches Maximum
- Style Designator [STYL]
- One Piece
- Terminal Slot Width [AHXR]
- 0.187 Inches Nominal
- Terminal Type And Quantity [TTQY]
- 1 Straight W/Slot
- Thickness [ABNM]
- 0.246 Inches Minimum And 0.250 Inches Maximum
- Top Style [BTHR]
- Flat With Left Edge Beveled
DLA Procurement Analysis 5977-00-028-4160
Management Data 5977-00-028-4160
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5977-00-028-4160
Freight Information 5977-00-028-4160
5977-00-028-4160 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 040580. A Sub NMFC of X. It has a NMFC Description of CARBON BRUSHES GENERATOR/MOTOR. 5977-00-028-4160 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 20480 which rates the freight between FCL and LCL. 5977-00-028-4160 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5977-00-028-4160 is not classified as a special type of cargo when transported by water. 5977-00-028-4160 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5977-00-028-4160
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5977-00-028-4160 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: