Premium Information is available for this item - Upgrade for $1 a day
5990-00-078-3182
Control Transformer Synchro
5990000783182 000783182 7627969P001 7627969P1 VCT18-4D1
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers. View more Control Transformer Synchro
May 2023
7
Marketplace 5990-00-078-3182
Request a Quotation from participating marketplace vendors
Related Documents 5990-00-078-3182 2+ Documents (More...)
Restrictions 5990-00-078-3182
5990-00-078-3182 is a Control Transformer Synchro that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5990-00-078-3182
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5990-00-078-3182
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Dec 1999
Approved Sources 5990-00-078-3182
- Part Number
- Manufacturer
- Status
- 7627969P001
- Manufacturer
- 03538 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- 7627969P1
- 03538 - Lockheed Martin Corporation (Active)
- Secondary Buy
- Secondary Buy
- VCT18-4D1
- 10112 - General Dynamics Motion Control Llc (Active)
- Secondary Buy
- Secondary Buy
- 7627969P001
- 10651 - Vernitron Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5990-00-078-3182
- Characteristic
- Specifications
- FIIG
- Specifications
- A07800
- Electrical Error Angular Range In Minutes [AJVL]
- -6.0/+6.0
- Actuator Friction Torque At Plus 25 Deg Celsius [AJVT]
- 0.10 Inch-Ounces Maximum
- Alignment Hole Bolt Circle Diameter [CTCW]
- 1.2500 Inches Nominal
- Alignment Hole Depth [CRSY]
- 0.1250 Inches Minimum
- Alignment Hole Quantity [AJVW]
- 4
- Body Material [AAFZ]
- Steel, Corrosion Resisting
- Body Size [AJSL]
- 18
- Body Style [AAQL]
- Standard Round C
- Flange Diameter [ABKK]
- 1.7470 Inches Minimum And 1.7500 Inches Maximum
- Flange Thickness [ABKU]
- 0.0900 Inches Minimum And 0.0960 Inches Maximum
- Fragility Factor [AFJN]
- Moderately Rugged
- Frequency In Hertz [AJSS]
- 400.0 Nominal
- Maximum Fundamental Null Voltage In Millivolts Per Volt [AJVG]
- 30.00 Output
- Maximum Total Null Voltage Output In Millivolts Per Volt [AJVH]
- 45.00
- Mounting Surface To Terminal End Distance [AJWX]
- 2.5230 Inches Maximum
- Schematic Diagram Designator [AEBZ]
- 1 Y-Rotor, 1 Stator
- Rotor Dc Resistance In Ohms [AJTS]
- 420.00 Nominal
- Shaft Diameter [ABWV]
- 0.1870 Inches Minimum Single Shaft And 0.1872 Inches Maximum Single Shaft
- Shaft Length [ABXF]
- 0.3790 Inches Minimum Single Shaft And 0.3870 Inches Maximum Single Shaft
- Shaft End Play Determining Weight [CWYF]
- 16.0 Ounces
- Shaft End Play [AJWH]
- 0.0030 Inches Maximum
- Shaft Maximum Radial Play [AJWG]
- 0.0008 Inches
- Shaft Maximum Runout [AJXB]
- 0.0008 Inches
- Shaft Nominal Thread Size [CWBH]
- 0.190 Inches Single Shaft
- Shaft Radial Play Determining Weight [CWXK]
- 16.0 Ounces
- Shaft Radial Play Test Point [AJWE]
- 0.125 Inches Maximum
- Shaft Thread Class [AKAN]
- 2A Single Shaft
- Shaft Thread Direction [AKAF]
- Right-Hand Single Shaft
- Shaft Thread Length [CQWQ]
- 0.3550 Inches Maximum Single Shaft
- Shaft Thread Series Designator [AJYY]
- Unf Single Shaft
- Shaft Type [CRSJ]
- Spline W/Threads Single Shaft
- Shoulder Diameter [AAVH]
- 1.5615 Inches Minimum And 1.5620 Inches Maximum
- Shoulder Length [AJWR]
- 0.1290 Nominal Mils And 0.1350 Nominal Centimeters
- Overall Length [ABHP]
- 3.0620 Inches Maximum
- Phase Shift Angle In Deg [AJVF]
- 3.000 Input To Output Nominal
- Pilot Length [AJWQ]
- 0.0370 Nominal Mils And 0.0430 Nominal Centimeters
- Pilot Diameter [AAVL]
- 0.9370 Inches Minimum And 0.9375 Inches Maximum
- Undercut Diameter [ABPA]
- 1.6220 Inches Minimum And 1.6280 Inches Maximum
- Undercut Width [ABPC]
- 0.0780 Inches Nominal
- Zso Impedance Angle In Deg [AJTK]
- 88.00 Nominal
- Zso Impedance Magnitude In Ohms [AJTJ]
- 13000.00 Nominal
- Spline Tooth Quantity [AJVM]
- 21 Single Shaft
- Spline Tooth Diametral Pitch [AJXA]
- 120 Single Shaft
- Stator Dc Resistance In Ohms [AJTT]
- 675.00 Nominal
- Stator Input Current Rating [AJSP]
- 7.0 Milliamperes Maximum
- Stator Input Electrical Power Rating [AJSQ]
- 100.0 Milliwatts Maximum
- Stator Input Voltage Rating In Volts [AJSN]
- 90.0 Nominal
- Terminal Location [CQTM]
- Rear
- Terminal Type And Quantity [TTQY]
- 5 Screw
- Transformation Ratio [CSJY]
- 0.735 Rotor To Stator Nominal
Weapon Systems (WSDC) 5990-00-078-3182
DLA Procurement Analysis 5990-00-078-3182
Management Data 5990-00-078-3182
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5990-00-078-3182
Freight Information 5990-00-078-3182
5990-00-078-3182 has freight characteristics managed by the Office od the Secretary of HEW.It has a National Motor Freight Classification (NMFC) of 061700. A Sub NMFC of Z. It has a NMFC Description of ELEC APPLIANCES/INSTRUMENTS NOI. 5990-00-078-3182 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34580 which rates the freight between FCL and LCL. 5990-00-078-3182 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5990-00-078-3182 is not classified as a special type of cargo when transported by water. 5990-00-078-3182 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5990-00-078-3182
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- A-A-1051, Paperboard Cushioning
- --
- PPP-B-566 or PPP-B-676, Folding or Setup Box
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5990-00-078-3182 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: