Premium Information is available for this item - Upgrade for $1 a day
5990-00-099-0700
Electrical Resolver
5990000990700 000990700 MIL-R-23417/25 9V-11R41N40A
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers. View more Electrical Resolver
May 2023
11
Marketplace 5990-00-099-0700
Request a Quotation from participating marketplace vendors
Related Documents 5990-00-099-0700 1+ Documents (More...)
Restrictions 5990-00-099-0700
5990-00-099-0700 is a Electrical Resolver that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5990-00-099-0700
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5990-00-099-0700
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5990-00-099-0700
- Part Number
- Manufacturer
- Status
- 9V-11R41N40A
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-R-23417/25
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5990-00-099-0700
- Characteristic
- Specifications
- FIIG
- Specifications
- A07800
- Alignment Hole Bolt Circle Diameter [CTCW]
- 0.8090 Inches Minimum And 0.8150 Inches Maximum
- Alignment Hole Depth [CRSY]
- 0.1250 Inches Nominal
- Alignment Hole Quantity [AJVW]
- 4
- Body Material [AAFZ]
- Steel, Stainless
- Body Size [AJSL]
- 11
- Body Style [AAQL]
- Standard Round C
- Flange Diameter [ABKK]
- 1.0570 Inches Minimum And 1.0650 Inches Maximum
- Flange Thickness [ABKU]
- 0.0930 Inches Nominal
- Frequency In Hertz [AJSS]
- 4000.0 Nominal
- Maximum Fundamental Null Voltage In Millivolts Per Volt [AJVG]
- 15.00 Output
- Maximum Temp Rise [AHCG]
- 85.0 Deg Celsius
- Maximum Total Null Voltage Output In Millivolts Per Volt [AJVH]
- 20.00
- Mounting Surface To Terminal End Distance [AJWX]
- 2.3340 Inches Minimum And 2.3540 Inches Maximum
- Interaxis Error Angular Range In Minutes [AJVJ]
- -7.0/+7.0
- Rotor Input Voltage Rating In Volts [AJSR]
- 9.0 Nominal
- Rotor Input Current Rating [AJST]
- 2.6 Milliamperes Nominal
- Rotor Input Electrical Power Rating [AJSV]
- 10.0 Milliwatts Nominal
- Shaft Diameter [ABWV]
- 0.1900 Inches Nominal Single Shaft
- Shaft Nominal Thread Size [CWBH]
- 0.190 Inches Single Shaft
- Shaft Thread Class [AKAN]
- 2A Single Shaft
- Shaft Thread Direction [AKAF]
- Right-Hand Single Shaft
- Shaft Thread Length [CQWQ]
- 0.2550 Inches Nominal Single Shaft
- Shaft Thread Series Designator [AJYY]
- Unf Single Shaft
- Shaft Type [CRSJ]
- Round, Threaded Single Shaft
- Shaft Length [ABXF]
- 0.5450 Inches Minimum Single Shaft And 0.5650 Inches Maximum Single Shaft
- Shoulder Diameter [AAVH]
- 0.9995 Inches Minimum And 1.0000 Inches Maximum
- Shoulder Length [AJWR]
- 0.0620 Inches Nominal
- Overall Length [ABHP]
- 2.4130 Inches Maximum
- Pilot Length [AJWQ]
- 0.0620 Inches Nominal
- Pilot Diameter [AAVL]
- 0.6245 Inches Minimum And 0.6250 Inches Maximum
- Undercut Diameter [ABPA]
- 0.9745 Inches Minimum And 0.9750 Inches Maximum
- Undercut Width [ABPC]
- 0.0500 Inches Nominal
- Zro Impedance Magnitude In Ohms [AJTG]
- 68.00 Minimum And 73.00 Maximum
- Zro Resistance In Ohms [AJSW]
- 3720.00 Minimum And 4467.00 Maximum
- Zss Impedance Magnitude In Ohms [AJTN]
- 65.00 Minimum And 69.00 Maximum
- Zss Resistance In Ohms [AJTC]
- 121.00 Minimum And 145.00 Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-23417/25 Government Specification
- Spline Tooth Quantity [AJVM]
- 21 Single Shaft
- Spline Tooth Diametral Pitch [AJXA]
- 120 Single Shaft
- Terminal Location [CQTM]
- Rear
- Terminal Type And Quantity [TTQY]
- 7 Screw
- Test Data Document [TEST]
- 81349-Mil-R-23417 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Transformation Ratio [CSJY]
- 0.497 Rotor To Stator Nominal
NATO Stock Numbers Related to 5990-00-099-0700
Freight Information 5990-00-099-0700
5990-00-099-0700 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 5990-00-099-0700 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 5990-00-099-0700 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 5990-00-099-0700 is not classified as a special type of cargo when transported by water. 5990-00-099-0700 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5990-00-099-0700
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- A-A-1051, Paperboard Cushioning
- --
- PPP-B-566 or PPP-B-676, Folding or Setup Box
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box