Premium Information is available for this item - Upgrade for $1 a day
5990-00-107-7157
Transmitter Synchro
5990001077157 001077157 11GLG4RHX/B796 7537280-1 7537280P1
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials. View more Transmitter Synchro
May 2023
8
Marketplace 5990-00-107-7157
Request a Quotation from participating marketplace vendors
Restrictions 5990-00-107-7157
5990-00-107-7157 is a Transmitter Synchro that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5990-00-107-7157
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5990-00-107-7157
- US Air Force (FXGX)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXTX
Approved Sources 5990-00-107-7157
- Part Number
- Manufacturer
- Status
- 11GLG4RHX/B796
- Manufacturer
- 99932 - Moog Inc. (Active)
- Primary Buy
- Primary Buy
- 7537280-1
- 99971 - Lockheed Martin Corp Naval (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 7537280P1
- 99971 - Lockheed Martin Corp Naval (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5990-00-107-7157
- Characteristic
- Specifications
- FIIG
- Specifications
- A07800
- Electrical Error Angular Range In Minutes [AJVL]
- -5.5/+5.5
- Actuator Friction Torque At Minus 55 Deg Celsius [AJVS]
- 40.0 Centimeter-Grams Nominal
- Actuator Friction Torque At Plus 25 Deg Celsius [AJVT]
- 20.0 Centimeter-Grams Nominal
- Body Material [AAFZ]
- Steel, Stainless
- Body Size [AJSL]
- 11
- Body Style [AAQL]
- Standard Round C
- Flange Diameter [ABKK]
- 1.0570 Inches Minimum And 1.0650 Inches Maximum
- Flange Thickness [ABKU]
- 0.0930 Inches Nominal
- Frequency In Hertz [AJSS]
- 400.0 Nominal
- Maximum Fundamental Null Voltage In Millivolts Per Volt [AJVG]
- 17.00 Output
- Maximum Total Null Voltage Output In Millivolts Per Volt [AJVH]
- 26.00
- Mounting Surface To Terminal End Distance [AJWX]
- 1.6910 Inches Maximum
- Rotor Input Voltage Rating In Volts [AJSR]
- 26.0 Nominal
- Rotor Dc Resistance In Ohms [AJTS]
- 8.50 Nominal
- Rotor Input Current Rating [AJST]
- 245.0 Milliamperes Nominal
- Rotor Input Electrical Power Rating [AJSV]
- 1.7 Watts Nominal
- Shaft Diameter [ABWV]
- 0.1870 Inches Minimum Single Shaft And 0.1873 Inches Maximum Single Shaft
- Shaft Slot Depth [CQZS]
- 0.0300 Inches Nominal Single Shaft
- Shaft Slot Width [CRHN]
- 0.0250 Inches Minimum Single Shaft
- Shaft Type [CRSJ]
- Round, Slotted Single Shaft
- Shaft Length [ABXF]
- 0.4750 Inches Minimum Single Shaft And 0.4950 Inches Maximum Single Shaft
- Shoulder Diameter [AAVH]
- 0.9995 Inches Minimum And 1.0000 Inches Maximum
- Shoulder Length [AJWR]
- 0.0590 Inches Minimum And 0.0650 Inches Maximum
- Overall Length [ABHP]
- 2.1660 Inches Minimum And 2.1860 Inches Maximum
- Pilot Length [AJWQ]
- 0.0590 Inches Minimum And 0.0650 Inches Maximum
- Pilot Diameter [AAVL]
- 0.6245 Inches Minimum And 0.6250 Inches Maximum
- Undercut Diameter [ABPA]
- 0.9700 Inches Minimum And 0.9800 Inches Maximum
- Undercut Width [ABPC]
- 0.0620 Inches Nominal
- Zro Impedance Angle In Deg [AJTH]
- 76.70 Minimum And 86.70 Maximum
- Zro Impedance Magnitude In Ohms [AJTG]
- 90.95 Minimum And 123.05 Maximum
- Zso Impedance Angle In Deg [AJTK]
- 74.50 Minimum And 84.50 Maximum
- Zso Impedance Magnitude In Ohms [AJTJ]
- 15.38 Minimum And 20.80 Maximum
- Stator Dc Resistance In Ohms [AJTT]
- 3.00 Nominal
- Terminal Location [CQTM]
- Rear
- Terminal Type And Quantity [TTQY]
- 5 Wire Lead
- Transformation Ratio [CSJY]
- 0.322 Rotor To Stator Nominal
DLA Procurement Analysis 5990-00-107-7157
Management Data 5990-00-107-7157
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - P
- Expendable. Reparable. Condemn at Intermediate. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5990-00-107-7157
Freight Information 5990-00-107-7157
5990-00-107-7157 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062820. A Sub NMFC of Z. It has a NMFC Description of RADIO/TV TRANSMIT/RECEIVE SETS. 5990-00-107-7157 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35080 which rates the freight between FCL and LCL. 5990-00-107-7157 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 5990-00-107-7157 is not classified as a special type of cargo when transported by water. 5990-00-107-7157 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5990-00-107-7157
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566 or PPP-B-676, Folding or Setup Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5990-00-107-7157 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: