Premium Information is available for this item - Upgrade for $1 a day
5990-00-132-2680
Linear Electrical Resolver
5990001322680 001322680 ESDH11AU6 229-6025-010
An item consisting of a stator and rotor inductively coupled which provides accurate linear indication of shaft rotation about a reference position in the form of a polarized voltage whose magnitude is proportional to angular displacement and phase relationship indicates direction of shaft rotation. Its windings and slots are not uniformly distributed, but instead are deliberately modified to produce a linear output which is usually limited to less than plus or minus 90 degrees of effective electrical travel. Normally it has only one energization winding and one output winding. See also RESOLVER, ELECTRICAL. View more Linear Electrical Resolver
May 2023
7
Marketplace 5990-00-132-2680
Request a Quotation from participating marketplace vendors
Related Documents 5990-00-132-2680 1+ Documents (More...)
Restrictions 5990-00-132-2680
5990-00-132-2680 is a Linear Electrical Resolver that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5990-00-132-2680
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5990-00-132-2680
- US Navy (N9BN)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5990-00-132-2680
- Part Number
- Manufacturer
- Status
- ESDH11AU6
- Manufacturer
- 99932 - Moog Inc. (Active)
- Primary Buy
- Primary Buy
- 229-6025-010
- 13499 - Rockwell Collins, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5990-00-132-2680
- Characteristic
- Specifications
- FIIG
- Specifications
- A07800
- Electrical Error Angular Range In Minutes [AJVL]
- -7.0/+7.0
- Actuator Friction Torque At Minus 55 Deg Celsius [AJVS]
- 9.0 Centimeter-Grams Nominal
- Actuator Friction Torque At Plus 25 Deg Celsius [AJVT]
- 3.0 Centimeter-Grams Nominal
- Alignment Hole Bolt Circle Diameter [CTCW]
- 0.8120 Inches Nominal
- Alignment Hole Depth [CRSY]
- 0.0700 Inches Maximum
- Alignment Hole Quantity [AJVW]
- 4
- Body Material [AAFZ]
- Any Acceptable
- Body Size [AJSL]
- 11
- Body Style [AAQL]
- Standard Round B
- Flange Diameter [ABKK]
- 1.0620 Inches Nominal
- Flange Thickness [ABKU]
- 0.0930 Inches Nominal
- Frequency In Hertz [AJSS]
- 400.0 Nominal
- Maximum Fundamental Null Voltage In Millivolts Per Volt [AJVG]
- 90.00 Output
- Mounting Surface To Terminal End Distance [AJWX]
- 1.7730 Inches Maximum
- Plus J Zro Reactance In Ohms [CQXQ]
- 3120.00 Nominal
- Plus J Zso Reactance In Ohms [CRGZ]
- 5240.00 Nominal
- Rotor Input Current Rating [AJST]
- 17.6 Milliamperes Nominal
- Rotor Input Electrical Power Rating [AJSV]
- 268.0 Milliwatts Nominal
- Rotor Input Voltage Rating In Volts [AJSR]
- 57.0 Nominal
- Rotor Dc Resistance In Ohms [AJTS]
- 450.00 Nominal
- Shaft Diameter [ABWV]
- 0.1200 Inches Nominal Single Shaft
- Shaft Slot Depth [CQZS]
- 0.0320 Inches Nominal Single Shaft
- Shaft Slot Width [CRHN]
- 0.0320 Inches Nominal Single Shaft
- Shaft Type [CRSJ]
- Round, Slotted Single Shaft
- Shaft Length [ABXF]
- 1.0000 Inches Nominal Single Shaft
- Shoulder Diameter [AAVH]
- 0.9750 Inches Nominal
- Shoulder Length [AJWR]
- 0.0620 Inches Nominal
- Overall Length [ABHP]
- 2.8510 Inches Maximum
- Phase Shift Angle In Deg [AJVF]
- 7.500 Input To Output Nominal
- Pilot Length [AJWQ]
- 0.0620 Inches Nominal
- Pilot Diameter [AAVL]
- 0.6250 Inches Nominal
- Undercut Width [ABPC]
- 0.0500 Inches Nominal
- Zro Resistance In Ohms [AJSW]
- 866.00 Nominal
- Zso Resistance In Ohms [AJSY]
- 1100.00 Nominal
- Stator Dc Resistance In Ohms [AJTT]
- 510.00 Nominal
- Terminal Location [CQTM]
- Rear
- Terminal Type And Quantity [TTQY]
- 6 Tab W/Screw
DLA Procurement Analysis 5990-00-132-2680
Management Data 5990-00-132-2680
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5990-00-132-2680
Freight Information 5990-00-132-2680
5990-00-132-2680 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 5990-00-132-2680 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 5990-00-132-2680 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 5990-00-132-2680 is not classified as a special type of cargo when transported by water. 5990-00-132-2680 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5990-00-132-2680
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- A-A-1051, Paperboard Cushioning
- --
- PPP-B-566 or PPP-B-676, Folding or Setup Box
- No special marking
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5990-00-132-2680 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: