Premium Information is available for this item - Upgrade for $1 a day
6105-00-825-1874
Alternating Current Motor
6105008251874 008251874 5KH32LN164X 5KH35KG428 5KH32KG651
A motor which is designed for operation from an alternating current source. See also MOTOR, CONTROL. View more Alternating Current Motor
May 2023
7
Marketplace 6105-00-825-1874
Request a Quotation from participating marketplace vendors
Restrictions 6105-00-825-1874
6105-00-825-1874 is a Alternating Current Motor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 6105-00-825-1874
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 6105-00-825-1874
- US Air Force (FXGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FXCX
- NASA (G860)
- Effective Date:
- 1 Apr 1997
Approved Sources 6105-00-825-1874
- Part Number
- Manufacturer
- Status
- 5KH32LN164X
- Manufacturer
- 88422 - General Electric Co (Active)
- Primary Buy
- Primary Buy
- 5KH35KG428
- 88422 - General Electric Co (Active)
- Secondary Buy
- Secondary Buy
- 5KH32KG651
- 88422 - General Electric Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 6105-00-825-1874
- Characteristic
- Specifications
- FIIG
- Specifications
- A271A0
- Duty Cycle [AKPS]
- Continuous
- Connection Type And Voltage Rating In Volts [CWGQ]
- 115.0 Line To Neutral Single Input
- Cooling Method [BFMF]
- Nonventilated
- Features Provided [CBBL]
- Horizontal Mounting Position And Vertical Mounting Position
- Flat Depth [AGRB]
- 0.047 Inches Nominal Single End
- Flatted Portion Length [ABXQ]
- 1.160 Inches Nominal Single End
- Frame Size Designation [CNMM]
- 48G
- Frequency In Hertz [FREQ]
- 60.0 Input
- Mounting Facility Type And Quantity [AXHR]
- 4 Slot
- Mounting Method [AXGY]
- Adjustable Base
- Nominal Center To Center Distance Between Mounting Facilities Parallel To Length [CWDT]
- 4.240 Inches
- Nominal Center To Center Distance Between Mounting Facilities Parallel To Width [CWFY]
- 2.780 Inches
- Overall Length [AAJU]
- 11.730 Inches
- Inclosure Feature [ANPZ]
- Explosion Proof
- Inclosure Specification [BKPQ]
- Nema
- Length Of Shaft From Housing [CWCS]
- 1.5000 Inches Single End
- Power Rating [CNXS]
- 0.166 Horsepower Output
- Rotor Speed Rating In Rpm [CWFX]
- 1725.0 Single Full Load
- Shaft Center To Mounting Surface Distance [CWDM]
- 3.000 Inches Single End
- Shaft Diameter [ABWV]
- 0.500 Inches Nominal Single End
- Shaft End Characteristic [CWHZ]
- A5 Single Style Single End
- Shaft Rotation Direction [AKCT]
- Clockwise Single End Or Counterclockwise Single End
- Overall Height [AAJT]
- 6.590 Inches
- Overall Width [AAJV]
- 6.310 Inches
- Phase [FAAZ]
- Single Input
- Winding Type [AXCP]
- Induction-Split Phase
- Temp Rating [CWDY]
- -20.0 Operating Deg Celsius And 40.0 Operating Deg Celsius And 55.0 Ambient Deg Celsius
DLA Procurement Analysis 6105-00-825-1874
Management Data 6105-00-825-1874
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - P
- Expendable. Reparable. Condemn at Intermediate. Stock Fund (except Munitions).
NATO Stock Numbers Related to 6105-00-825-1874
Freight Information 6105-00-825-1874
6105-00-825-1874 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062120. A Sub NMFC of Z. It has a NMFC Description of GENERATORS/MOTORS/PARTS NOI. 6105-00-825-1874 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 34760 which rates the freight between FCL and LCL. 6105-00-825-1874 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 6105-00-825-1874 is not classified as a special type of cargo when transported by water. 6105-00-825-1874 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 6105-00-825-1874 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: