6110-00-088-1127

Guide Pin

6110000881127 000881127 1537463

6110-00-088-1127 PIN,GUIDE 6110000881127 000881127

Managed by United States
NSN Created on 20 Dec 1967
Data Last Changed
January 2023
NATO Update Count
9
NATO Data Quality
6110-00-088-1127 PIN,GUIDE 6110000881127 000881127 1/1
NSN 6110-00-088-1127 (Generic Image) 1/1

6110-00-088-1127 Stock and Availability Marketplace 6110-00-088-1127

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
6110-00-088-1127 RQST NE eBay
eBay Updated Every Day
6110-00-088-1127 RQST eBay
Amazon Updated Every Day
6110-00-088-1127 RQST NE Amazon

6110-00-088-1127 Related Documents Related Documents 6110-00-088-1127 5+ Documents (More...)

4730-15-153-7463 4730151537463 151537463 is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. it is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. for square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. excludes clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.
5310-33-153-7463 5310331537463 331537463 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
8145-66-153-7463 8145661537463 661537463 is a reusable item of any configuration designed to enclose any of a variety of item(s) to protect them against impact, vibration, climatic conditions and the like, during transport and storage. do not use if a more specific name applies.

6110-00-088-1127 Demil Restrictions 6110-00-088-1127

DEMIL: A | DEMILI: | CRITICALITY: | HMIC: N | PMIC: U | EDC: | ADPEC:

6110-00-088-1127 is a Guide Pin This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.

6110-00-088-1127 End Users End Users 6110-00-088-1127

Australia (ZA01)
Effective Date:
1 Apr 1991
Turkey (ZW01)
Effective Date:
1 Nov 2005

6110-00-088-1127 Related Items NATO Stock Numbers Related to 6110-00-088-1127

6110-00-088-1127 Freight Data Freight Information 6110-00-088-1127

6110-00-088-1127 has freight characteristics.. 6110-00-088-1127 has a variance between NMFC and UFC when transported by rail and the description should be consulted.