6125-00-327-9476

HMMWV TM-9 - 2320 - 280 - 20 Technical Manual Unit Maintenance of M998, M998A1, M1025, M1025A1, M1025A2, M0126, M1026A1 and other models. Page 955 of 1170.

4820-01-294-1643 4820012941643 012941643 is an item usually metallic, threaded or unthreaded, used for securing to or positioning into a mating part. it is designed to be used in a globe, relief, regulator valve and the like as a means of controlling the flow of liquids or gases in a given system. one end may have an integral disk or be designed to accommodate a metallic or nonmetallic disk. the other end is designed for a handwheel, lever, spring, diaphragm and the like for nonpowered operation or to accommodate a gear, solenoid, air motor and the like for powered operation. the handwheel and/or disk may be furnished with the item. excludes stem, faucet; and stem, needle valve.

4820-14-331-3253 4820143313253 143313253 is a valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. the flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. it may be inline or cartridge (manifold) design. excludes valve (1), y; valve, stop-check; and cock, shutoff, screw stem.

4820-14-331-3032 4820143313032 143313032 is a valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. the flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. it may be inline or cartridge (manifold) design. excludes valve (1), y; valve, stop-check; and cock, shutoff, screw stem.

5977-00-038-2336 5977000382336 000382336 is an item designed to transmit pressure to a brush, electrical contact for the purpose of maintaining contact between the brush and another conducting surface for the transfer of electrical energy. the item may include one or more pressure springs or tension springs.