6530-00-476-5245

476-5244 Bacterial Spore Sterilization Test Ampules 1264RNCC: 5 | RNVC: 9 | DAC: 4 16 Jun 1971 6530-00-476-5245

your web browser . 2530-21-896-9300Righ Brake Assembly2530218969300 218969300 3236M1262 A5-3236-M-1262
participating marketplace vendors Request Updated Every Day 3236M1262 RQST NE Updated Every Day A5-3236-M-1262
NumberManufacturerStatus3236M1262 78500 - Meritor Heavy Vehicle Systems, Llc (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 A5-3236-M-1262

JavaScript in your web browser . 3120-14-331-2319Cam Follower Plain Bearing3120143312319 143312319 M1262

3120-00-554-6523 3120005546523 005546523 is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.

5305-01-417-3840 5305014173840 014173840 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.