6620-00-089-9775

5340-33-206-7004 5340332067004 332067004 is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. it is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. to permit access, the mounted cover requires partial or complete removal. it may include an observation window. for items permanently attached by hinges and the like, see door, access (as modified). excludes all covers not specifically designed to provide access for the purposes listed above.

3990-33-207-2329 3990332072329 332072329 is an item consisting of one or more steel rolls, a shoe type brake, and rail clamps mounted in a metal frame. it is designed as the rolling element for cradles, adapters, hoisting units, and the like, used on trailer, rail type; stand, maintenance, rail type, shipping containers and the like.

5365-33-206-7140 5365332067140 332067140 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

5365-33-206-7141 5365332067141 332067141 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

2040-33-207-2326 2040332072326 332072326 is a rigid metallic or non-metallic item of various shapes, designed for mounting on a marine door to prevent wear or damage of component parts as a result of friction. it may have a flat or convex bearing surface and may be riveted, welded, bolt mounted and the like.