6625-00-007-0530

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Radio Frequency Power Test Set (INC 21191) 6625-00-007-0530

5310-17-100-3000 5310171003000 171003000 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5440-01-315-3944 5440013153944 013153944 is fabricated steel rails with braces and anchor pins, used for retaining concrete and as tracks for supporting concrete paving and finishing equipment.

5995-15-100-3000 5995151003000 151003000 is a definite continuous length of cable, power, electrical having one or both ends processed and/or terminated in fittings which provide for connection to other items. excludes cable and conduit assembly, electrical and items having branches or forks. see also wiring harness.

6810-00-100-3000 6810001003000 001003000 ACETONE,ACS