6636-15-188-4458

www.nsnlookup.com /fsg-66/fsc-6636 Environmental Chambers and Related Equipment from Italy (IT) 6636-15-188-4458

15 Sep 2009 6636-15-188-4438 Sistema Di Umidific 522959RNCC: 3 | RNVC: 2 | DAC: 5 15 Sep 2009 6636-15-188-4458

Sep 2002 6636-15-168-1152 Camera Climatica Te 11AA0500RNCC: 3 | RNVC: 2 | DAC: 1 1 Nov 2002 6636-15-188-4458

5310-14-235-1981 5310142351981 142351981 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3120-21-007-3675 3120210073675 210073675 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.