6685-01-449-7177

-450-1365 Dial Indicating Pressure Gage 1521139-LFP220RNCC: 5 | RNVC: 9 | DAC: E 28 Oct 1997 6685-01-449-7177

5360-99-150-7257 5360991507257 991507257 is an open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. the close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. excludes spring, reinforcing, hose.

1440-25-150-7257 1440251507257 251507257 EQUALIZER MOUNTING

3040-15-150-7257 3040151507257 151507257 is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. it is not designed for use in aligning by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items designed to support rotating members see axle(1), straight. for items not having the above conditions see pin, straight, headless. for items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

4710-00-150-7257 4710001507257 001507257 is a length of tubing, straight, or prebent to a predetermined angle, with added component(s) that forms an end connection on one or both ends. for flexible tube assemblies, see hose assembly (as modified). for items having perforations in the tubing or attachments, see tube assembly, fire extinguishing system. excludes items having integral preformed or plain ends, tube, bent (as modified), and items which are branched or forked.