6830-01-303-2648

of 1 6830-01-303-1369 Technical Carbon Dioxide 26001405RNCC: 3 | RNVC: 2 | DAC: 4 25 Jun 1989 6830-01-303-2648

6210-14-210-0404 6210142100404 142100404 CAISSE LOT GROUPE E

6640-15-210-0404 6640152100404 152100404 PRESSA DA BANCO

5365-00-210-0404 5365002100404 002100404 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5340-33-210-0404 5340332100404 332100404 is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. it is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. may include provisions for locking. see also yoke, universal joint and connector, rod end. for items specifically designed for aviation, see clevis, rod end, aviation.