7035-00-104-5500

5365-01-614-9195 5365016149195 016149195 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5935-01-288-4808 5935012884808 012884808 is an item specifically designed to mate with another connector to perform one or more special functions, such as to act as a cover or shield, to short contacts, or to open or close electrical circuits, in or on another connector. it cannot be used as a connector, plug, electrical. excludes dummy plug,telephone.

2530-99-794-4341 2530997944341 997944341 PARTS KIT,REACTION

Upgrade your Account Upgrade 5998-25-138-2852Printed Circuit Board5998251382852 251382852 ROE 123 2814/1
5998-25-138-2852 Norway (ZT) Approved Sources 5998-25-138-2852 Part NumberManufacturerStatusROE 123 2814/1

4820-99-209-7173 4820992097173 992097173 is a valve designed to automatically release excessive pressures. it is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. it is not designed for regulation of continuously fluctuating loads. it may be inline or cartridge (manifold) design. excludes valve (1), relief, pressure and temperature.